메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Chang-Su Kim (Tongmyong University) Dong-Woo Park (Tongmyong University) Young-Jun Yang (Tongmyong University)
저널정보
한국마린엔지니어링학회 Journal of Advanced Marine Engineering and Technology (JAMET) 한국마린엔지니어링학회지 제44권 제3호
발행연도
2020.6
수록면
196 - 202 (7page)
DOI
10.5916/jamet.2020.44.3.196

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Ships have holes with various functions. However, there are difficulties in designing holes necessary for the construction of fittings due to incorrect information management systems. As a result, most shipyards have developed and used hole information management systems using 3D computer-assisted design (CAD). However, the systems developed at present are only applied to inner plate constructions; in the case of the shell plate, fieldwork is performed. The construction of the shell plate hole at the site not only requires significant amounts of work and time but also poses safety problems such as accidents during work, which can occur due to the limited workspace. To solve these problems, this study developed an automatic shell plate hole generation system that can be applied to shell plates such as sea chest holes, drain holes, and air holes using the 3D CAD system AVEVA Marine. The developed automatic shell plate hole generation system was applied to an actual shipyard process with no existing cases and its utility was confirmed.

목차

Abstract
1. Introduction
2. System Structure
3. System Configuration
4. System Application Results
5. Conclusion
References

참고문헌 (7)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-559-000841036