지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2020.1
- 수록면
- 138 - 145 (8page)
이용수
초록· 키워드
오류제보하기
Immersion tests of Alloy 600 were conducted in simulated primary water environments of a pressurizedwater reactor at 325 °C for 10, 100, and 1000 h to obtain insight into effects of surface deformation oninternal and intergranular (IG) oxidation behavior through precise characterization using various microscopicequipment. Oxidized samples after immersion tests were covered with polyhedral and filamentous oxides. It was found that oxides were abundant in mechanically ground (MG) samples the most. The number densityof surface oxides increased with time irrespective of the method of surface finish. IG oxidation occurredin mechanically polished (MP) and chemically polished (CP) samples with thin internal oxidation layers. However, IG oxidation was suppressed with relatively thick internal oxidation layers in MG samples comparedto MP and CP samples, suggesting that MG treatment could increase resistance to primary water stresscorrosion cracking (PWSCC) from the standpoint of IG oxidation. As a result, appropriate surface treatmentfor Alloy 600 could prevent oxygen diffusion into grain boundaries, inhibit IG oxidation, and finally induceits high PWSCC resistance.
목차
등록된 정보가 없습니다.
참고문헌 (27)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Oxidation Behavior of (W, Re)-Bearing Single Crystal Nickel-Base Superalloys
Metals and Materials International
2021 .01
-
Surface Functionalization of Ti₃C₂Tx with towards Improved Oxidation Stability
한국고분자학회 학술대회 연구논문 초록집
2023 .04
-
Oxidation behavior and mechanism of oxidation of Si3N4/ TiC micro-nanocomposite ceramic materials
Journal of Ceramic Processing Research
2017 .06
-
티타늄이 첨가된 알루미나 분산강화 동합금의 산화물 형성 거동
한국재료학회지
2015 .01
-
Effect of TiAl3 Coating Thickness and Morphology, Formed Using the Immersion of Titanium Sheets in Molten Aluminum, on Titanium Oxidation Behavior
Metals and Materials International
2019 .01
-
Oxide Scale Characterization and Study of Oxidation Kinetics in T91 Steel Exposed to Dry Air at High Temperatures (873?1073 K)
Metals and Materials International
2022 .08
-
Anodic oxidation behavior of AZ31 Mg alloy in aqueous solution containing various NaF concentrations
한국표면공학회지
2022 .08
-
Facile Method to Reduce Thermo-oxidation of PDMS by Blending with Natural Polyphenols
한국고분자학회 학술대회 연구논문 초록집
2021 .04
-
수소화물에 의한 Zr 합금의 고온산화 가속효과
한국표면공학회지
2016 .08
-
Effect of Ti Addition on the Microstructure and High-Temperature Oxidation Property of AlCoCrFeNi High-Entropy Alloy
Metals and Materials International
2021 .01
-
Synthesis of thin Aluminum oxide on Aluminum by anodic oxidation in the aqueous bath for the tunneling electron emission device
한국표면공학회 학술발표회 초록집
2021 .06
-
일산화탄소 산화반응을 위한 Cu/CeO<sub>2</sub> 촉매의 반응특성
공업화학
2019 .01
-
Microstructural characterization of accident tolerant fuel cladding with Cr?Al alloy coating layer after oxidation at 1200 °C in a steam environment
Nuclear Engineering and Technology
2020 .10
-
Surface Observation of Mg-HA Coated Ti-6Al-4V Alloy by Plasma Electrolytic Oxidation
한국표면공학회 학술발표회 초록집
2016 .11
-
Review on Electrodeposited Ni–W Based Composite Coatings in High-Temperature Applications Concerning Oxidation Behavior
Metals and Materials International
2024 .06
-
High-Temperature Oxidation Behavior of NiCoCrAlY Coatings Deposited by Laser Cladding on 304 Stainless Steel
Metals and Materials International
2022 .02
-
소듐, 리튬금속화재에 대한 불활성 기체 소화약제의 적용성 분석
한국위험물학회지
2020 .12
-
Effects of Electrical Parameters on the Surface Characteristics of Pulse Plasma Electrolytic Oxidation on Aluminum Alloy
한국표면공학회 학술발표회 초록집
2017 .11
-
Oxidation of Fe-(5.3-29.8)%Mn-(1.1-1.9)%Al-0.45%C Alloys at 550-650℃
Corrosion Science and Technology
2022 .02
-
강판 종별 표면 산화 거동에 관한 연구
한국수소및신에너지학회논문집
2018 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0