메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국기계기술학회 한국기계기술학회지 한국기계기술학회지 제21권 제6호
발행연도
2019.1
수록면
1,174 - 1,179 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Deicing agent refers to the substance that melts snow by exothermic or endothermic chemical reaction after spraying on snow. It also has the function of reducing the freezing point to prevent freezing. However, the long-term use of deicing agent can cause some negative problems, such as pot hole, concrete corrosion, vehicle and steel bridge parts corrosion. At present, wet salt spray deicing is a cost-effective deicing method that is being widely used. Typical deicing agents are calcium chloride and sodium chloride. Deicing equipment is placed to similar or higher corrosive environment than coastal or marine environment due to direct contact to chloride in deicing operation. Therefore, the anti-corrosion control is very important for the maintenance of deicing equipment. In this study, corrosion resistance, blistering and repairability of the deicing equipment were tested by using test standard (Salt water production and spraying- KS D 9502 , Evaluating Degree of Rusting- ASTM D 610, Evaluating Degree of Blistering- ASTM D 714, pull-off strangth of coatings- ASTM D 4541). And an economical coating system with long-term antirust performance was constructed. The results show that the performance of the coating system has been improved than with the original coating.

목차

등록된 정보가 없습니다.

참고문헌 (7)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0