메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제21권
발행연도
2020.1
수록면
0 - 0 (0page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
In order to increase the bone bonding-ability and biocompatibility of zirconia-based implants, the surface roughness must behigh. In this study, we tried to improve the surface roughness of the zirconia substrates by surface modification using two typesof zirconia slurry and spin coating. We also investigated to the effect of repeated coating times on the surface roughness ofcoating layer. Coating layers fabricated by slurry and spin coating showed uniform thickness and dense microstructure. Asincreasing the repeated coating times, the thickness of coating layer gradually increased from 0.7 to 1.7 μm in case of smallparticles or from 0.9 to 2.0 μm in case of large particles. Slurry containing small particles (~ 40 nm) had low viscosity and goodforming-ability of coating films, but the improvement of surface roughness by slurry coating was not high. Roughnessenhancement on coated layer in zirconia slurry containing large particles (~100nm) was higher than that of small particles atthe same processing condition. In this study, 4 times coating specimen showed maximum surface roughness of Ra 0.36 μm in3Y-TZP powder containing large particles, or Ra 0.27 μm in that of small particles.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0