메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Park, Yun-Heum (Research Lab., KOLON INC.)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제15권 제4호
발행연도
1978.1
수록면
57 - 61 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The preceding review suggests that for structural foam formation the gas may be introduced directly during processing or may be formed as the result of breakdown of chemical blowing agents such as azodicarbonamide. The choice of the chemical blowing agent depends on the polymer processing temperature and the end-use of the product. The ideal chemical blowing agent should decompose over a definite and short range of temperature. When chemical blowing agents are used for foam production, the optimum processing conditions are that decomposition of blowing agent should be incomplete in the extruder and begin in the metering section of the extruder where high pressures will dissolve the evolved gases in the polymer. The dissolved gas becomes supersaturated and begins to form bubbles when it emerges from the die into the low pressure. The bubble formation occurs at sites nucleated by the decomposition of the remaining blowing agent. This optimum foaming condition can be accomplished by extruding at high shear rates through a die. The effect of bubbles on the tensile properties and drawing behavior of polymer is very different according to polymer structure. Generally, physical properties exhibit higher values in fine-celled high density foam than large-celled low density foams. More information is needed on the influence of nucleating agents on foam properties. Suitable tests to measure foam quality quantitatively are needed.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0