메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
장동호 (영남대학교 공과대학 섬유공학과) 유덕환 (영남대학교 공과대학 섬유공학과, 주식회사 Kolon, 서울대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제16권 제4호
발행연도
1979.1
수록면
1 - 6 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The Crystallinity, orientation, crystallite size, yield stress and initital modulus of wet drawn PET filaments annealed at various temperatures and time intervals were measured by wide angle X-ray diffraction method and, stress strain curves. The following results were found; 1) The crystallinity increases as annealing temperature rises and time increases. In the case of 14$0^{\circ}C$, 16$0^{\circ}C$, and 18$0^{\circ}C$, crystallinity increases up to 50% at 15 minutes of annealing, and there is nosignificant increase between the intervals of 15 and 30 minutes, whereas a remarkable increase(60%) is noted in the case of 22$0^{\circ}C$. 2) The crystallite size of 010 plane and orientation(1/ $\frac{1}{2}$) was observed when annealed at 20$0^{\circ}C$. 3) Initial moduli increase with temperature rises and time increases and change almost linearly with crystallinities and orientations.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0