메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김한도 (부산대학교 공과대학 섬유공학과) 강주영 (부산대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제33권 제4호
발행연도
1996.1
수록면
386 - 391 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
A series of thermoplastic elastomer copolymers were prepared by melt polymerization using dimethyl terephthalate(DMT)/1,4-butanediol(BD)/poly(tetramethylene ether) glycol(PTMG) and DMT/BD/poly(3-methyl pentamethylene adipate) glycol(PMPA). The effects of chemical structure on the properties of thermoplastic elastomer copolymers were examined by incorporating two different polyol units in the polymer chain. Copolymers that were melt processible at low temperature below 20$0^{\circ}C$ were obtained with inherent viscosities in the range of 0.5~0.9. The glass transition and melting temperatures, hardness and apparent crystal size of the copolymers were increased with increasing hard segment content. The copolymers based on PMPA have higher glass transition temperature and maintain stiffness to higher temperature than those of the copolymers based on PTMG at the same hard segment content. However, the melting temperature and apparent crystal size of the copolymer based on PTMG were higher than those of the copolymers based on PMPA. The Shore A hardness of copolymers, depending on the hard segment content, were in the range of 16~96.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0