지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 1991.1
- 수록면
- 53 - 61 (9page)
이용수
초록· 키워드
오류제보하기
Mechanical properties of composite panel made with 3mm thick Apitong(Dipterocarpus grandiflorus) veneer on each face of particleboard core of 4 different specific gravity were determined. The results obtained were as follows: 1. Measured MOR and MOE increased with an increased in specific gravity of particleboard core. 2. Test results showed that the difference in bending properties between flatwise bending and edgewise bending was present. The average MOE value of flatwise loading was higer than that of epdgewise loading. But it was shown reverse tendency in MoR and MOE. 3. The delamination between face veneer and core particle was found in flatwise bending but nell in edgewise. 4. These composite panel could be substituted for plywood and other panel materials in furniture making as considered suitable allowable stress and bending strength.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
The Effect of Exposure in Elevated Temperatures on Bending Properties of Wood
목재공학(Journal of the Korean Wood Science and Technology)
1999 .01
-
Effect of Heat Treatment on the Bending Strength and Hardness of Wood
목재공학(Journal of the Korean Wood Science and Technology)
2012 .01
-
Nondestructive Evaluation of Bending Strength Performances for Red Pine Containing Knots Using Flexural Vibration Techniques
목재공학(Journal of the Korean Wood Science and Technology)
2005 .01
-
NEW DEVELOPMENT IN PARTICLEBOARD TECHNOLOGY
목재공학(Journal of the Korean Wood Science and Technology)
1980 .01
-
Measurement of Dynamic MOE of 3-Ply Laminated Woods by Flexural Vibration and Comparison with Blending Strength and Creep Performances
목재공학(Journal of the Korean Wood Science and Technology)
2006 .01
-
삭편판과 단판 또는 합판을 구성 접착한 콤플라이 복합재에 관한 연구
목재공학(Journal of the Korean Wood Science and Technology)
1990 .01
-
Evaluation of Physical and Mechanical Properties of Non-certificated Laminated Veneer Lumber (LVL) Circulated in Domestic Lumber Market
목재공학(Journal of the Korean Wood Science and Technology)
2011 .01
-
낙엽송 소경각재의 휨 파괴계수 예측
목재공학(Journal of the Korean Wood Science and Technology)
2018 .01
-
Dimensional Stability and Bending Properties of Small Diameter Log Treated by Sap-displacement Method
목재공학(Journal of the Korean Wood Science and Technology)
2000 .01
-
스트랜드/파티클 복합체의 기계적 성질에 관한 연구(I) - 단면구성이 기초물성에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
2000 .01
-
제지 슬러지의 첨가가 요소수지 파티클보드의 포름알데히드 방산 및 물리적, 기계적 성질에 미치는 영향
목재공학(Journal of the Korean Wood Science and Technology)
1994 .01
-
Effects of Heating Temperature and Time on the Mechanical Properties of Heat-Treated Woods
목재공학(Journal of the Korean Wood Science and Technology)
2015 .01
-
비파괴평가에 의한 라디에타소나무 단판 및 수지함침시트 표면적층 합판의 휨성능
목재공학(Journal of the Korean Wood Science and Technology)
1998 .01
-
주기적(週期的) 조습처리(調濕處理)가 파티클보드와 콤플라이의 치수 안정성(安定性)에 미치는 영향(影響)
목재공학(Journal of the Korean Wood Science and Technology)
1992 .01
-
3층(層) 파티클보드의 기계적(機械的) 성질(性質) 예측(豫測)에 관(關)한 연구(硏究)
목재공학(Journal of the Korean Wood Science and Technology)
1993 .01
-
국산재의 파괴인성에 관한 연구 (II) - 활엽수의 모-드 I 파괴 -
목재공학(Journal of the Korean Wood Science and Technology)
1991 .01
-
Static Bending Performances of Cross-Laminated Wood Panels Made with Tropical and Temperate Woods
목재공학(Journal of the Korean Wood Science and Technology)
2018 .01
-
Studies on Manufacturing Wood Particle-Polypropylene Fiber Composite Board
목재공학(Journal of the Korean Wood Science and Technology)
2001 .01
-
내화처리(耐火處理)가 파아티클보오드와 콤플라이보오드의 기계적성질(機械的性質) 및 내화도(耐火度)에 미치는 영향(影響)
목재공학(Journal of the Korean Wood Science and Technology)
1985 .01
-
Study on Statistical Distributions for the Mechanical Properties of Thinning Crop-Trees from Pinus koraiensis
목재공학(Journal of the Korean Wood Science and Technology)
1993 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0