메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
방윤혁 (부산대학교 공과대학 섬유공학과) 조현혹 (부산대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제31권 제11호
발행연도
1994.1
수록면
874 - 880 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
As-spun filament of copolyacrylonitrile(AN/MA=95/5w1%) has been prepared and subsequcntly stretched. The stretched filaments which contain moisture were shrunk freely by 5%~25% on heating in dry air at 130~17$0^{\circ}C$. The change of morphology and mechanical properties was examined by various techniques such as thermal mechanical analyzer(TMA), scanning electron microscopy(SEM). rheovibron and tension. After heat treatment, residual shrinkage of fiber decreased significantly with increasing shrinkage, while it was little affected by heat treatment temperature. Electron microscopy revealed that surfaces of acrylic fibers were grooved along the fiber axis. The grooves developed by the collapse of voids during the process of drying increased slightly with increasing shrinkage and heat treatment temperature. Maximum tan § peak became broader with increasing shrinkage. Consequently, enhancement in thermal dimensional stability and mechanical properties of fibers treated under these conditions(16$0^{\circ}C$$\times$10%) may be due to an optimum increase of dipole bonds between -CN groups.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0