지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 테크노프레스 Structural engineering and mechanics : An international journal Structural engineering and mechanics : An international journal 제4권 제1호
- 발행연도
- 1996.1
- 수록면
- 37 - 47 (11page)
이용수
초록· 키워드
오류제보하기
The paper considers the elastic distortional buckling of overhanging beams, which consist of an internal segment with a cantilevered segment continuous over an internal support. The beams were considered loaded by a concentrated load at the cantilever tip, and the beams were either partially restrained or laterally restrained over the internal support. An efficient line-type finite element developed previously by the author was modified to incorporate loading remote from the shear centre, as well as to allow for lateral buckling without distortion. Buckling loads were obtained for a range of geometry when the load was placed on the top flange, at the shear centre or on the bottom flange. Buckling mode shapes were also obtained, and conclusions drawn regarding the influence of distortion on the overall buckling load.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Elastic distortional buckling of tapered composite beams
Structural engineering and mechanics : An international journal
1997 .01
-
Buckling of post-tensioned composite beams
Structural engineering and mechanics : An international journal
1994 .01
-
Large post-buckling behavior of Timoshenko beams under axial compression loads
Structural engineering and mechanics : An international journal
2014 .01
-
Comparison of alternative algorithms for buckling analysis of slender steel structures
Structural engineering and mechanics : An international journal
2012 .01
-
Exact buckling load of a restrained RC column
Structural engineering and mechanics : An international journal
2007 .01
-
돔형 스페이스 프레임의 부재강성변화에 따른 임계좌굴하중과 유효좌굴길이계수
한국공간구조학회지
2013 .01
-
Lateral buckling formula of stepped beams with length-to-height ratio factor
Structural engineering and mechanics : An international journal
2004 .01
-
Experimental determination of the buckling load of a flat plate by the use of dynamic parameters
Structural engineering and mechanics : An international journal
2000 .01
-
H형(形) 강(鋼) 보의 횡좌굴(橫挫屈)에 관(關)한 연구(硏究)
산업기술연구 : 강원대학교 산업기술연구소
1984 .01
-
유한 요소법에 의한 H-형강보의 휭좌굴 해석에 관한 연구 ( The Study on the Behavior of Lateral Buckling of Reinforced H-Section Beams by Finite Element Method )
대한건축학회 학술발표대회 논문집 - 구조계
1994 .10
-
Inelastic lateral-torsional buckling strengths of stepped I-beams subjected to general loading condition
Structural engineering and mechanics : An international journal
2013 .01
-
하중과 지점 조건의 변화에 따른 압연 I형 보의 횡좌굴 강도
대한건축학회 학술발표대회 논문집 - 구조계
2004 .04
-
The analytical solution for buckling of curved sandwich beams with a transversely flexible core subjected to uniform load
Structural engineering and mechanics : An international journal
2014 .01
-
A novel first order refined shear-deformation beam theory for vibration and buckling analysis of continuously graded beams
Advances in aircraft and spacecraft science
2019 .01
-
Numerical study of dynamic buckling for plate and shell structures
Structural engineering and mechanics : An international journal
2005 .01
-
용접H형강보의 내력 및 변형에 관한 실험적 연구(2) ( An Experimental Study on the Strength and Deformation of Welded H-Beam )
대한건축학회 학술발표대회 논문집 - 구조계
1985 .04
-
Experimental determination of the buckling load of rectangular plates using vibration correlation technique
Structural engineering and mechanics : An international journal
2011 .01
-
Post-buckling analysis of shear-deformable composite beams using a novel simple two-unknown beam theory
Structural engineering and mechanics : An international journal
2018 .01
-
Lateral buckling of reinforced concrete beams without lateral support
Structural engineering and mechanics : An international journal
1998 .01
-
파형 강판 웨브를 갖는 보의 매개변수 해석 연구
한국공간구조학회지
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0