메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김종성 (경희대학교 지능공정 및 제어연구실) 서문원 (북캐롤리나 주립대학교 섬유대학) 허유 (경희대학교 기계.산업시스템 공학부)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제46권 제1호
발행연도
2009.1
수록면
42 - 47 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
This study set the target to systemize the roller drafting operation and performed the characteristic analysis by simulation of the effect of the draft ratio, an important process variable, on the output sliver thickness, based on the bundle flow model. The simulative result showed that the output sliver thickness possesses a fixed point for a value of draft ratio in the range of the linear stability. As the draft ratio increases, the drafted sliver thickness changes in a periodical way, which corresponds to the critical case in a linearized system. Then for the further increase of the draft ratio the output sliver thickness has an initial increase of the deviation from the stationary value, which is justified for an unstable system, but when time elapses long, the increase of the amplitude is limited in a certain range, showing a closed trajectory in the phase plane. This dynamic characteristics is called the limit cycle behavior. Eventually the sliver output from the roller draft operation varies in the characteristics of the linear density for the draft ratio; a fixed point occurs, and then the fixed point disappears, as the draft ratio increases, which is a typical Hopf bifurcation phenomenon. The existence of the draft wave can be thus justified as a limit cycle behavior due to the non-linearity of the bundle flow system.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0