메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
함명조 (숭실대학교 유기신소재.파이버공학과) 김영호 (숭실대학교 유기신소재.파이버공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제47권 제2호
발행연도
2010.1
수록면
102 - 109 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
Amorphous poly(phenylene sulfide) (PPS) films were prepared by melt-pressing virgin PPS chips of high linearity and quenching into ice water. The films were annealed at $240^{\circ}C$ for up to 17 days and investigated by using a DSC. Both the melting temperature and heat of melting of PPS increased with increasing annealing time at $240^{\circ}C$, whereas the melt crystallization temperature and heat of melt crystallization decreased. Although the melting peak on heating still appeared, the melt crystallization peak on cooling disappeared after more than 10 days annealing, indicating the introduction of high degree of cross-linking. FTIR analysis and solubility tests of the annealed films also suggested the introduction of crosslinking. Increased crosslinking density refrained PPS from melt crystallization and dissolution in a solvent. Annealing at lower temperature such as $160^{\circ}C$ for up to 24 hours resulted in increasing the tensile strength of the films significantly without crosslinking. The chemical resistance of the films was almost unaffected in strong acid and alkaline solutions at $93^{\circ}C$ for 7 days.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0