지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
This study was performed to investigate the removal characteristics of phosphate by adsorption on olivine, which is generated as industrial by-products from quarry. The adsorption of phosphate on olivine was significantly achieved within 1 hour and equilibrated after 3 hours. The adsorption capacity of phosphate was enhanced with decreasing pH. The maximum adsorption capacity was observed to be 0.463 mg/g in the condition of pH 3. The $Ca^{2+}$ and $Mg^{2+}$ ion amount per adsorbent eluted from olivine was increased with decreasing pH. The precipitation test showed that phosphate in aqueous phase under the condition of pH 3 ~ 9 could be eliminated largely by adsorption on olivine, not precipitation. Freundlich adsorption model were successfully applied to describe the adsorption behavior of phosphate on olivine. The $q_m$ of Langmuir adsorption model were 1.3369 mg/g, 1.0544 mg/g, 1.0288 mg/g at pH 3, 6 and 9, respectively. The $K_F$ of Freundlich adsorption model were 0.4247 mg/g, 0.3399 mg/g, 0.2942 mg/g at pH 3, 6 and 9, respectively. The olivine showed high feasibility as a adsorbent for the removal of $PO_4$-P.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0