지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2012.1
- 수록면
- 361 - 368 (8page)
이용수
초록· 키워드
오류제보하기
Purpose: The aim of this study was to analysis the composition on the centrifugal casting and the oxide on the casting temperature. Methods: The nickel based alloy were used in this study. Wax pattern specimens (10*10*2) were invested with phosphate-bonded investment in metal rings, the liquid/powder ratio and overall burn-out schedules for these investments were followed in accordance with the manufacturer's instructions. After casting, the alloy specimens were evaluated as regards composition(EPMA). The casting temperatures were as follows: $1400^{\circ}C$ and $1700^{\circ}C$. The quantitative analysis of oxides were scanning electron microscope(SEM), energy dispersive spectroscopy(EDS) and line scanning. Results: Nearer the injection lines showed that there is a large amount of nickel. Quantitative of oxides of Ni-Cr alloy cast from $1400^{\circ}C$ is lager than Ni-Cr alloy cast from $1700^{\circ}C$. Conclusion: Casting when using a centrifugal casting machine centrifugal force affects the composition of the alloy. The higher the temperature, the amount of oxide that is generated many.
목차
등록된 정보가 없습니다.
참고문헌 (24)
참고문헌 신청
Atsu S / 2000 / Bond strength of three porcelains to two forms of titanium using two firing atmospheres / J Prosthet Dent 84:567~574
Atwood RC / 2005 / Modeling the surface contamination of investment castings / Dent Mater 21:178~186
Bauer J / 2009 / Effect of argon purity on mechanical properties, microstructure and fracture mode of commercially pure(cp) Ti and Ti-6Al-4V alloys for ceramometal dental prostheses / Biomed Mater 4:065002
Benatti OF / 2000 / In vitro and in vivo corrosion evaluation of nickelchromium- and copper-aluminum-based alloys / J Prosthet Dent 84:360~363
Bezzon OL / 1998 / Effect of beryllium on the castability and resistence of cerometal bonds in nickelchromium alloys / J Prosthet Dent 80:570~574
Atwood RC / 2005 / Modeling the surface contamination of investment castings / Dent Mater 21:178~186
Bauer J / 2009 / Effect of argon purity on mechanical properties, microstructure and fracture mode of commercially pure(cp) Ti and Ti-6Al-4V alloys for ceramometal dental prostheses / Biomed Mater 4:065002
Benatti OF / 2000 / In vitro and in vivo corrosion evaluation of nickelchromium- and copper-aluminum-based alloys / J Prosthet Dent 84:360~363
Bezzon OL / 1998 / Effect of beryllium on the castability and resistence of cerometal bonds in nickelchromium alloys / J Prosthet Dent 80:570~574
이 논문의 저자 정보
최근 본 자료
댓글(0)
0