지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
Purpose: With the development of digital dental technology, we are manufacturing prosthetic crown in various ways. However, the wax-up method that makes existing prosthetic crown is also used steadily. Thus, we will compare the shape of the crown designed with wax-up and the crown designed with CAD. Methods: Sculpt the crown with wax-up on the model to 10 dental technicians. The same model was used to design the crown CAD. Measure the size of the sculpted crown. The shapes were compared in three dimensions. Results: As a result, we could observe a difference in size and shape in crown designed with wax - up crown and crown. Conclusion: These results suggest that there are differences according to the method of carving crown and the method of processing.
목차
등록된 정보가 없습니다.
참고문헌 (7)
참고문헌 신청
Cho SB / 2014 / Comparison of the repeatability and reproducibility of two dental CAD/CAM scanners
허중보 / 2014 / CAD/CAM 보철물의 제작 과정에서 오류가 발생할 수 있는 요소들에 대한 경험적 고찰 / 대한치과의사협회지 52(6):332~345
Hwang YC / 2014 / The evaluation of working casts prepared from diital impressions
Joun MS / 2014 / Repeatability and reproducibility evaluation of dental CAD/CAM scanners
Lee JJ / 2016 / Comparison analysis of accuracy of single abutment digital model obtained by intraoral scanners and model scanners
허중보 / 2014 / CAD/CAM 보철물의 제작 과정에서 오류가 발생할 수 있는 요소들에 대한 경험적 고찰 / 대한치과의사협회지 52(6):332~345
Hwang YC / 2014 / The evaluation of working casts prepared from diital impressions
Joun MS / 2014 / Repeatability and reproducibility evaluation of dental CAD/CAM scanners
Lee JJ / 2016 / Comparison analysis of accuracy of single abutment digital model obtained by intraoral scanners and model scanners
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
In-vitro performance and fracture strength of thin monolithic zirconia crowns
The Journal of Advanced of Prosthodontics
2018 .01
-
Six-year clinical performance of lithium disilicate glass-ceramic CAD-CAM versus metal-ceramic crowns
The Journal of Advanced of Prosthodontics
2023 .02
-
Fracture resistance and marginal fit of the zirconia crowns with varied occlusal thickness
The Journal of Advanced of Prosthodontics
2020 .01
-
An alternative method to convert fractured metal ceramic surveyed crown into a complete contour zirconia surveyed crown using CAD-CAM technology under anticancer treatments: a clinical report
구강회복응용과학지
2015 .03
-
Early complications and performance of 327 heat-pressed lithium disilicate crowns up to five years
The Journal of Advanced of Prosthodontics
2016 .01
-
Comparison of fit and trueness of zirconia crowns fabricated by different combinations of open CAD-CAM systems
The Journal of Advanced of Prosthodontics
2023 .06
-
Fracture resistance of implantsupported monolithic crowns cemented to zirconia hybridabutments: zirconia-based crowns vs. lithium disilicate crowns
The Journal of Advanced of Prosthodontics
2018 .01
-
Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system
The Journal of Advanced of Prosthodontics
2017 .08
-
유전치 기성 크라운의 형태 및 치질 삭제량 비교
대한소아치과학회지
2019 .01
-
Fracture resistance of CAD-CAM all-ceramic surveyed crowns with different occlusal rest seat designs
The Journal of Advanced of Prosthodontics
2021 .01
-
Evaluation of the marginal and internal fit of a single crown fabricated based on a threedimensional printed model
The Journal of Advanced of Prosthodontics
2018 .01
-
Evaluation of marginal fit of 2 CAD-CAM anatomic contour zirconia crown systems and lithium disilicate glass-ceramic crown
The Journal of Advanced of Prosthodontics
2015 .01
-
Effect of different tooth preparation designs on the marginal and internal fit discrepancies of cobalt-chromium crowns produced by computer-aided designing and selective laser melting processes
The Journal of Advanced of Prosthodontics
2021 .10
-
원내에서 5축 밀링기로 가공한 PMMA temporary crown의 다양한 임상적 활용
대한심미치과학회지
2017 .01
-
How adjustment could affect internal and marginal adaptation of CAD/CAM crowns made with different materials
The Journal of Advanced of Prosthodontics
2020 .01
-
The comparison of the accuracy of temporary crowns fabricated with several 3D printers and a milling machine
The Journal of Advanced of Prosthodontics
2023 .04
-
Fabrication of a CAD/CAM monolithic zirconia crown to fit an existing partial removable dental prosthesis
The Journal of Advanced of Prosthodontics
2016 .01
-
Accuracy of provisional crowns made using stereolithography apparatus and subtractive technique
The Journal of Advanced of Prosthodontics
2018 .01
-
Ceramic molar crown reproducibility by digital workflow manufacturing: An in vitro study
The Journal of Advanced of Prosthodontics
2017 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0