지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
Hot rolling of Mg-6Zn-0.6Zr-0.4Ag-0.2Ca-(0, 8 wt%)Li powder was conducted at the temperature of $300^{\circ}C$ by putting the powder into the Cu pipe. The microstructure and mechanical properties of the samples were observed. Mg-6Zn-0.6Zr-0.4Ag-0.2Ca without Li element was consisted of ${\alpha}$ phase and precipitates. The microstructure of the 8 wt%Li containing alloy consisted of two phases (${\alpha}$-Mg phase and ${\beta}$-Li phase). In addition, $Mg_2Zn_3Li$ was formed in 8%Li added Mg-6Zn-0.6Zr-0.4Ag-0.2Ca alloy. By addition of the Li element, the non-basal planes were expanded to the rolling direction, which was different from the based Mg alloy without Li. The tensile strength was gradually decreased from 357.1 MPa to 264 MPa with increasing Li addition from 0% to 8%Li. However, the elongation of the alloys was remarkably increased from 10 % to 21% by addition of the Li element to 8%. It is clearly considered that the non-basal texture and ${\beta}$ phase contribute to the increase of elongation and formability.
목차
등록된 정보가 없습니다.
참고문헌 (15)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Characterization of Microstructure and Mechanical Properties of Mg–8Li–3Al–1Y Alloy Subjected to Different Rolling Processes
Metals and Materials International
2018 .01
-
이속 압연된 마그네슘 합금의 미세조직 및 기계적 물성에 미치는 가공 변수의 영향
소성·가공
2018 .02
-
Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-10Li-3Al-3Zn-0.22Si Alloy
Metals and Materials International
2022 .10
-
Effect of Asymmetric Rolling on the Microstructure, Mechanical Properties and Texture Evolution of Mg–8Li–3Al–1Y Alloy
Metals and Materials International
2019 .01
-
냉간압연가공에 따른 Al-5.5Mg-2.9Si계와 Al-7Mg-0.9Zn계 합금의 압연가공성 및 기계적 특성 차이
한국재료학회지
2016 .01
-
Effect of Microstructure and Mechanical Properties of Aluminum Alloy by Hot Rolling Final Thickness and Temperature
한국소성가공학회 학술대회 논문집
2023 .11
-
Effect of Al on the Microstructure and Mechanical Properties of Mg?Sn?Ca?Mn Wrought Alloy
Metals and Materials International
2022 .06
-
Influence of Li Addition on the Microstructures and Mechanical Properties of Mg–Li Alloys
Metals and Materials International
2021 .01
-
Optimization of the compound microstructures of Li-ion battery electrodes
대한기계학회 춘추학술대회
2018 .12
-
The effects of Mg<sub>2</sub>Si<sub>(p)</sub> on microstructure and mechanical properties of AA332 composite
Advances in materials research : AMR
2016 .01
-
이속압연된 Cu-3.0Ni-0.7Si 합금의 어닐링에 따른 두께방향으로의 미세조직 및 기계적 특성 변화
한국재료학회지
2018 .01
-
A356 합금 내 미량의 Mg/Cu 첨가 및 열처리조건에 따른 미세조직 및 기계적 성질 변화
한국생산제조학회 학술발표대회 논문집
2020 .12
-
Prediction of Mechanical Properties in Consideration of Process-Microstructure Relationship
한국소성가공학회 학술대회 논문집
2023 .05
-
Thixomolding 공정으로 제조된 Mg-xAl-yZn계 마그네슘 합금의 미세조직과 기계적 물성에 미치는 Ti 첨가 영향
열처리공학회지
2019 .01
-
Effect of hot deformation on Microstructure and Mechanical properties during Solution Treatment and Aging Process of Ti-6Al-4V alloy
대한기계학회 춘추학술대회
2022 .06
-
Improvement of Microstructure, Mechanical Property and Corrosion Resistance of Mg?9Li?3Al?1Ca Alloy Through Centrifugal Casting
Metals and Materials International
2021 .11
-
Effect of Lanthanum Addition on Grain Refinement and Mechanical Properties of Mg?9Li?3Al Alloy
Metals and Materials International
2021 .10
-
열간 연속 압연기의 압연 특성 분석
한국생산제조학회 학술발표대회 논문집
2017 .12
-
Effect of La2O3 on Microstructure and Mechanical Properties of Mg–3Y Alloy
Metals and Materials International
2024 .07
-
Mg-11Li-3Zn-1Sn-0.4Mn 마그네슘 합금의 Ca 첨가에 따른 미세조직 및 기계적 특성평가
한국재료학회지
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0