Effect of Several Exterior Adhesive Types on Dimensional Stability of Bamboo Oriented Particleboard

Iswanto, Apri Heri; Munthe, Rensus; Darwis, Atmawi; Azhar, Irawati; Susilowati, Arida; Prabuningrum, Dita Sari; Fatriasari, Widya

추천

검색

자료유형: 학술저널

저자정보: Iswanto, Apri Heri (Faculty of Forestry, Universitas Sumatera Utara) Munthe, Rensus (Faculty of Forestry, Universitas Sumatera Utara) Darwis, Atmawi (School of Life Sciences Technology, Institut Teknologi Bandung) Azhar, Irawati (Faculty of Forestry, Universitas Sumatera Utara) Susilowati, Arida (Faculty of Forestry, Universitas Sumatera Utara) Prabuningrum, Dita Sari (Graduated School of Bogor Agricultural University) Fatriasari, Widya (Research Center for Biomaterials LIPI)

저널정보: 한국재료학회 한국재료학회지 한국재료학회지 제29권 제5호

발행연도: 2019.1

수록면: 277 - 281 (5page)

이용수

📌

연구주제

📖

연구배경

🔬

연구방법

🏆

연구결과

초록· 키워드

오류제보하기

The objective of this research is to evaluate the effect of adhesive types on dimensional stability of bamboo-oriented particleboard. The materials used in this research are bamboo tali(Gigantochloa apus J.A & J.H. Schult. Kurz), UF/MDI(8, 10, 12 % level), and MF, MDI, and PF at 7 % level. Particle and adhesive are mixed using a blending machine; then, mat forming and hot pressing processes are performed using adhesive-suitable temperature and time references. MDI resin is set at $160^{\circ}C$ temperature for 5 minutes. PF resin and MF resin are pressed at $170^{\circ}C$ for 10 minutes, and $140^{\circ}C$ for 10 minutes, respectively, while UF/MDI sets at temperature of $140^{\circ}C$ for 10 minutes. The results show that particleboard using PF resin produces the lowest thickness swelling value. The particleboard using UF/MDI resin also produces good response for thickness swelling value. Interesting things happen in that UF/MDI adhesive produces a thickness swelling value better than that of MDI resin. FTIR analysis on particleboard bonded by UF/MDI resin combination shows the presence of carbonyl group C=O vibration on multi substitution of urea at wave number of around $1,700cm^{-1}$.

#bamboo #adhesives type #oriented particleboard #dimensional stability

참고문헌 (16)

참고문헌 신청

N. Ayrilmis / 2012 / Int. J. Adhes. Adhes 38:79

I. M. Sulastiningsih / 2013 / J. Ilmu Teknol. Kayu Tropis 11:140

Apri Heri Iswanto / 2017 / Physical and Mechanical Properties of Three-layer Particleboards Bonded With UF and UMF Adhesives / 목재공학 45(6):787~796

A. H. Iswanto / 2017 / J. Indian Acad. Wood Sci 14:1

A. H. Iswanto / 2017 / Proceeding of 1st Annual Applied Science and Engineering Conference. IOP Conf. Series: Materials Science and Engineering 180:012015

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!