지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.1
- 수록면
- 157 - 169 (13page)
이용수
초록· 키워드
오류제보하기
The structural integrity of tube bundles represents a major concern when dealing with high risk industries, such as nuclear steam generators, where the rupture of a tube or tubes will lead to the undesired mixing of the primary and secondary fluids. Flow-induced vibration is one of the major concerns that could compromise the structural integrity. The vibration is caused by fluid flow excitation. While there are several excitation mechanisms that could contribute to these vibrations, fluidelastic instability is generally regarded as the most severe. When this mechanism prevails, it could cause serious damage to tube arrays in a very short period of time. The tubes are therefore stiffened by means of supports to avoid these vibrations. To accommodate the thermal expansion of the tube, as well as to facilitate the installation of these tube bundles, clearances are allowed between the tubes and their supports. Progressive tube wear and chemical cleaning gradually increases the clearances between the tubes and their supports, which can lead to more frequent and severe tube/support impact and rubbing. These increased impacts can lead to tube damage due to fatigue and/or wear at the support locations. This paper presents simulations of a loosely supported multi-span U-bend tube subjected to turbulence and fluidelastic instability forces. The mathematical model for the loosely-supported tubes and the fluidelastic instability model is presented. The model is then utilized to simulate the nonlinear response of a U-bend tube with flat bar supports subjected to cross-flow. The effect of the support clearance as well as the support offset are investigated. Special attention is given to the tube/support interaction parameters that affect wear, such as impact and normal work rate.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Flow-induced instability and nonlinear dynamics of a tube array considering the effect of a clearance gap
Nuclear Engineering and Technology
2019 .01
-
Fluidelastic instability of a tube array in two-phase cross-flow considering the effect of tube material
Nuclear Engineering and Technology
2019 .01
-
증기발생기 전열관지지판의 축균열 파열억제 효과 분석
한국안전학회지
2015 .01
-
각도가 다른 3선과 4선 스파이럴관에 직교하는 외부유동의 열전달 특성에 관한 수치해석 연구
대한설비공학회 학술발표대회논문집
2017 .11
-
Fluidelastic instability of a curved tube array in single phase cross flow
Nuclear Engineering and Technology
2023 .03
-
Large amplitude free vibrations of FGM shallow curved tubes in thermal environment
Smart Structures and Systems, An International Journal
2020 .01
-
증기발생기 제작에 따른 튜브결함 방지 연구
한국정밀공학회 학술발표대회 논문집
2017 .12
-
Experimental investigation of impact-sliding interaction and fretting wear between tubes and anti-vibration bars in steam generators
Nuclear Engineering and Technology
2020 .01
-
유체탄성불안정 모델의 재검토와 이상유동 불안정 문제에 대한 적용성 분석
한국소음진동공학회 학술대회논문집
2015 .04
-
Expansion tube에 의해 생성된 초음속 유동의 수치적 모의실험
대한기계학회 춘추학술대회
2021 .11
-
Mechanism analysis on fluidelastic instability of tube bundles in considering of cross-flow effects
Nuclear Engineering and Technology
2019 .01
-
지중튜브시스템 주요 설계 변수의 성능 평가
한국태양에너지학회 논문집
2016 .06
-
증기발생기 전열관 충격 미끄럼 마모 모델 개발
한국압력기기공학회 논문집
2023 .12
-
원전 증기발생기 전열관 관막음 한계 고찰
한국압력기기공학회 논문집
2020 .12
-
굽힘하중과 내압을 받는 마모 전열관의 파열 압력에 경계 조건이 미치는 영향
대한기계학회 춘추학술대회
2021 .11
-
Vortex tube를 이용한 농도 분리 실험
대한기계학회 춘추학술대회
2016 .04
-
Investigation of Two-phase Flow Pressure Drop of R410A during Evaporation in Single Tubes and Multiport Tubes
대한기계학회 춘추학술대회
2018 .04
-
Effect of Tube Thickness on Thermal-Hydraulic Design of a Once-Through Steam Generator
대한기계학회 춘추학술대회
2023 .04
-
소수성 코팅된 수평관내에서의 적응축 유도를 통한 응축 열전달 성능 증진
대한기계학회 춘추학술대회
2016 .12
-
Effects of included angle on pool boiling of tube array having horizontal upper tube
Nuclear Engineering and Technology
2020 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0