메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
유민수 (한국수자원공사) 김홍집 (충남대학교)
저널정보
한국유체기계학회 한국유체기계학회 논문집 한국유체기계학회 논문집 제23권 제5호(통권 제122호)
발행연도
2020.10
수록면
43 - 49 (7page)
DOI
10.5293/kfma.2020.23.5.043

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The existing mixing basin is comprised of 16 basins and each basin has different inflow flux and input chemical flow rate. Therefore, the mixing efficiency of the existing mixing basin was very lower due the inappropriate distribution channel and the nonuniform flow pattern, In this study, in order to investigate the flow pattern and the mixing efficiency, there were simulated the flow patten, the flow stability, and the mixing pattern by using the CFD analysis and experiment for the previous model and the advanced model. As a result of the numerical calculation, CFD results confirm that the weir height is increased to 0.2m from the existing model to obtain the most optimal flow. Because the head water level was more than 0.7m, which showed sufficient mixing strength. Also, in the verification test, the zeta potential, the flow current, the cohesive floc size, and the filtration time were compared with mechanical mixing, showing superiority in all items. By replacing the existing mechanical mixing with a head water level, reducing the number of used mixing basin from 16 to 2, and improving the weir drop height, the length from the mixing basin to the coagulation basin could be reduced by approximately 30m and the flocculation efficiency was improved.

목차

ABSTRACT
1. 서론
2. 본론
3. CFD 해석
4. 결과 및 검토
5. 실증실험
6. 결론
References

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-554-001309669