메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Saleem Akhtar (National University of Sciences and Technology (NUST)) A. Nusair Khan (Ibn-e-Sina Institute of Technology) Mushtaq Khan (National University of Sciences and Technology (NUST)) Syed Husain Imran Jaffery (National University of Sciences and Technology (NUST)) Arslan Saleem (Kyungpook National University)
저널정보
한국자기학회 Journal of Magnetics Journal of Magnetics Vol.25 No.4
발행연도
2020.12
수록면
469 - 474 (6page)
DOI
10.4283/JMAG.2020.25.4.469

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
SmCo<SUB>5</SUB> is well known for its high coercivity. However, still room is available to increase the coercive power of SmCo<SUB>5</SUB>, since the theoretical values of the compound is far higher than the achieved values. Different attempts, in this regard, have been made either by controlling the microstructure or the chemical composition. However, it is noted that no or very few literature is available regarding the control of microstructure through solidification. Three types of SmCo<SUB>5</SUB> compound were prepared through induction melting technique so that final solidification be manipulated by controlling the mold temperature. Fractrographic analysis revealed a unique peritectic structure in SmCo<SUB>5</SUB> compound. It was observed that the peritectic plates, having nano-size thickness, remain present even after high temperature sintering operation. The nano-scale peritectic plates may affect the final magnetic properties, especially the coercivity of the subject compound.

목차

1. Introduction
2. Experimental
3. Results and Discussion
4. Conclusion
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0