메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김윤곤 (대구대학교)
저널정보
대한건축학회 대한건축학회논문집 大韓建築學會論文集 第37卷 第2號(通卷 第388號)
발행연도
2021.2
수록면
173 - 180 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A new floor load distribution method for slabs with sub-beam was proposed, taking into account slab stiffness. In the current 45 degree-based load distribution method, the load distribution ratio of sub-beam and girder (RB:RG) is the same (50:50). However, when considering the composite action with slab and boundary conditions, the ratio of sub-beam would be smaller than that of girder. In this study, floor load distribution ratio according to the relative stiffness of slab and sub-beam and boundary conditions was evaluated by finite element analysis including slabs. The load distribution of the slab was greater when increasing the relative stiffness of slab and sub-beam, and that of sub-beam decreased as greater as that of the slab. For conservative design approach, the reduced portion from the sub-beam due to would add the load distribution of girder rather than subtraction from total floor load. In practical modules- span length, beam geometry, etc., the ratio (RB:RG) can be adjusted up to 40:60 by reducing the stiffness of sub-beam obtained by performance based design.

목차

Abstract
1. 서론
2. 작은 보의 바닥하중분배 방법 제안
3. 유한요소해석 결과분석을 통한 제안모델의 구체화
4. 요약 및 결론
REFERENCES

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-540-001583410