지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.6
- 수록면
- 284 - 294 (11page)
이용수
초록· 키워드
오류제보하기
Aluminium alloy 6082-T6 plays a vital role in the fabrication of lightweight structures, especially for the manufacturing of artillery, defense vehicles, and aircraft. Aluminium alloy 6082-T6 is a well-known structural alloy having a high strength-to-weight ratio and favorable corrosion resistance properties in extreme environments. In this study, three friction stir welding (FSW) process parameters (spindle speed, weld speed, and shoulder penetration), two geometrical tool parameters to precisely describe the pin profile, and the shoulder profile were considered at five levels. Optimization was conducted using the Taguchi experimental design method, and FSW experiments were conducted in a conventional milling machine. The parameters were optimized to maximize the tensile strength for various plate thicknesses. The number of tool pin polygon edges determines the corresponding welding pulses. The results show that 105-110 pulses/s is an optimal value to achieve a high-quality, defect-free weld.
목차
Abstract
1. Introduction
2. Experimental procedure
3. Results and discussion
4. Conclusions
References
참고문헌 (30)
참고문헌 신청
W. M. Thomas / 1991 / Friction stir butt welding / Int. Pat. Appl. PCT/ GB92/ 02203
G.K. Padhy / 2018 / Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review / Journal of Materials Science & Technology 34(1):1~38
G. Huang / 2000 / Partially melted zone in aluminium welds - liquation mechanism and directional solidification / Weld. Res. Suppl 79:113~120
J. Adamowski / 2007 / Friction Stir Welds (FSW) of aluminium alloy AW6082-T6 / J. Achiev. Mater. Manuf. Eng. 20(1-2):403~406
H. Jamshidi Aval / 2011 / Theoretical and experimental investigation into friction stir welding of AA 5086 / The International Journal of Advanced Manufacturing Technology 52(5-8):531~544
G.K. Padhy / 2018 / Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review / Journal of Materials Science & Technology 34(1):1~38
G. Huang / 2000 / Partially melted zone in aluminium welds - liquation mechanism and directional solidification / Weld. Res. Suppl 79:113~120
J. Adamowski / 2007 / Friction Stir Welds (FSW) of aluminium alloy AW6082-T6 / J. Achiev. Mater. Manuf. Eng. 20(1-2):403~406
H. Jamshidi Aval / 2011 / Theoretical and experimental investigation into friction stir welding of AA 5086 / The International Journal of Advanced Manufacturing Technology 52(5-8):531~544
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
실험계획법에 의한 Al5052 알루미늄 합금의 마찰교반용접특성
동력시스템공학회지
2015 .08
-
Parametric studies in friction stir welding on Al-Mg alloy with (HCHCr) tool by Taguchi based desirability function analysis (DFA)
Journal of Ceramic Processing Research
2020 .01
-
Optimization of process parameters in friction stir welding of aluminium matrix SiC-Al2O3 composites by genetic algorithm
Journal of Ceramic Processing Research
2020 .01
-
A356 알루미늄 합금을 이용한 마찰교반용접 조건에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2016 .10
-
Research Trend of FSW Technology of Aluminum Alloy
대한용접학회 특별강연 및 학술발표대회 개요집
2015 .05
-
Optimization of Friction Stir Welding Parameters of AA2014-T6 Alloy using Taguchi Statistical Approach
대한용접·접합학회지
2020 .10
-
Multi-objective optimization of friction stir welding using Taguchi design method, response surface model and particle swarm algorithm
한국자동차공학회 춘계학술대회
2021 .06
-
Influence of the Welding Speeds and Changing the Tool Pin Profiles on the Friction Stir Welded AA5083-O Joints
대한용접·접합학회지
2017 .06
-
마찰교반 용접조건에 따른 Al 5052 알루미늄 합금의 접합특성
동력시스템공학회지
2016 .06
-
고정숄더 마찰교반용접에서 용접속도 상승에 따른 알루미늄 합금 6061-T6 맞대기 용접부 품질 평가
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .10
-
Recent Advances in Friction-stir Welding Process and Microstructural Investigation of Friction Stir Welded Pure Titanium
대한용접·접합학회지
2017 .08
-
A3004 알루미늄합금의 마찰교반점접합
대한용접학회 특별강연 및 학술발표대회 개요집
2017 .11
-
Thermal and Frequency Response Analysis on Friction Stir Welding Tool with Different Materials by Using FEA Method
대한용접·접합학회지
2024 .08
-
알루미늄합금 간 마찰교반점접합
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .05
-
중첩된 알루미늄 5052 합금판재의 전기저항가열 마찰교반점용접에 관한 연구
소성·가공
2015 .08
-
T-Joining of AA6063 extrusion plates by Friction Stir Welding
대한용접학회 특별강연 및 학술발표대회 개요집
2020 .11
-
Effect of Friction Stir Welding Parameters on Microstructure Development and Mechanical Properties of Aluminum Alloy Joints
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .10
-
알루미늄을 이용한 마찰교반용접 공정별 최적조건에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2016 .04
-
Microstructural analysis and optimization of welding parameters for AA1100 welded plates
Journal of Ceramic Processing Research
2022 .04
-
고강도 알루미늄 합금의 마찰교반용접 특성 연구
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0