메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Jeong-Jong Lee (Korea Electronics Technology Institute) Ki-Doek Lee (Korea Electronics Technology Institute) Hae-Joong Kim (Gyeongnam Namhae University) Myung-Hwan Yoon (Korea Electronics Technology Institute)
저널정보
한국자기학회 Journal of Magnetics Journal of Magnetics Vol.26 No.2
발행연도
2021.6
수록면
166 - 174 (9page)
DOI
10.4283/JMAG.2021.26.2.166

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper proposes a design of 90 kW concentrated flux synchronous motor (CFSM). A ferrite magnet is used because of low price compared to rare-earth materials and this spoke type structure of motor can be an alternative to the interior permanent magnet synchronous motor (IPMSM) using NdFeB. However, a greater size of ferrite magnet is required to achieve the same torque as NdFeB is used, because the residual induction of ferrite is approximately one third of NdFeB. Consequently, the spoke type structure is applied to improve the torque density. In the design process, methods of deciding the stack length, stator diameter, rotor diameter, and the number of poles and slots are suggested. Series turns per phase are determined by applying back-electromotive force-inductance map (EL map) in the initial design. A response surface method is applied for the optimization. Furthermore, a structural analysis is also conducted to confirm the safety at high speed. Finally, test of CFSM is conducted for the verification.

목차

1. Introduction
2. Initial Design of Concentrated Flux Synchronous Motor
3. Optimization
4. Structural Analysis, Demagnetization, and Thermal Analysis
5. Result
6. Conclusion
References

참고문헌 (27)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0