메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
서남혁 (전북대학교) 최승규 (전북대학교) 전준협 (전북대학교) 윤상일 (삼기오토모티브) 김동현 (삼기오토모티브) 김태영 (삼기오토모티브) 손승배 (전북대학교) 이석재 (전북대학교)
저널정보
조선대학교 공학기술연구원 공학기술논문지 공학기술논문지 제13권 제4호
발행연도
2020.1
수록면
173 - 178 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Silafont-36 alloy is an Al-Si-Mg based alloy widely used in automotive applications. Its mechanical properties can be changed through T5 or T6 heat treatment. In this study, we investigated the influence of T6 heat treatment on the mechanical properties of Silafont-36 alloy prepared by die casting. The standard T6 heat treatment condition is as follows: (1) solution heat treatment for 2 hours in vacuum atmosphere at 510°C and water quenching, and (2) artificial aging treatment for 4 hours at 180°C in vacuum atmosphere and air cooling. Heat treatments were applied based on the above treatment conditions with changes in the solution treatment and artificial aging treatment conditions. Tensile test, hardness test, and microstructure analysis were performed on the heat-treated specimens. As the solution treatment temperature increased, the tensile strength increased. On the other hand, tensile strength decreased with increasing aging temperature and holding time. From a microstructure analysis, it was confirmed that the tensile strength increased with decreasing secondary dendrite arm spacing.

목차

등록된 정보가 없습니다.

참고문헌 (22)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0