지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.37 No.6
- 발행연도
- 2020.1
- 수록면
- 649 - 662 (14page)
이용수
초록· 키워드
오류제보하기
Although several types of rigid shear connectors have been developed particularly to increase load-carrying capacity, application is limited due to the complicated details of such connection. In this study, push-out tests were performed for specimens with hybrid shear connectors using headed studs and shear plates to identify the effects of each parameter on the structural performance of such shear connection. The test parameters included steel ratios of headed stud to shear plate, connection length, and embedded depth of shear plates. The peak strength and residual strength were estimated using various shear transfer mechanisms such as stud shear, concrete bearing, and shear friction. The hybrid shear connectors using shear plates and headed studs showed large load-carrying capacity and deformation capacity. The peak strength was predicted by the concrete bearing strength of the shear plates. The residual strength was sufficiently predicted by the stud shear strength of headed studs or by shear friction strength of dowel reinforcing bars. Further, the finite element analysis was performed to verify the shear transfer mechanism of the connection with hybrid shear connector.
목차
등록된 정보가 없습니다.
참고문헌 (50)
참고문헌 신청
2019 / ACI 318, Building code requirements for structural concrete (ACI 318-19): an ACI standard: commentary on building code requirements for structural concrete / American Concrete Institute
Van Phuoc Nhan Le / 2016 / Behavior of steel and concrete composite beams with a newly puzzle shape of crestbond rib shear connector: an experimental study / Structural Engineering and Mechanics, An Int＇l Journal 60(6):1001~1019
Jin-Hee Ahn / 2007 / Fatigue experiment of stud welded on steel plate for a new bridge deck system / Steel and Composite Structures, An International Journal 7(5):391~404
AISC Committee / 2010 / Specification for structural steel buildings, (ANSI/AISC 360-10) / American Institute of Steel Construction
Hamed Allahyari / 2014 / Mechanical behavior of steel-concrete composite decks with perfobond shear connectors / Steel and Composite Structures, An International Journal 17(3):339~358
Van Phuoc Nhan Le / 2016 / Behavior of steel and concrete composite beams with a newly puzzle shape of crestbond rib shear connector: an experimental study / Structural Engineering and Mechanics, An Int＇l Journal 60(6):1001~1019
Jin-Hee Ahn / 2007 / Fatigue experiment of stud welded on steel plate for a new bridge deck system / Steel and Composite Structures, An International Journal 7(5):391~404
AISC Committee / 2010 / Specification for structural steel buildings, (ANSI/AISC 360-10) / American Institute of Steel Construction
Hamed Allahyari / 2014 / Mechanical behavior of steel-concrete composite decks with perfobond shear connectors / Steel and Composite Structures, An International Journal 17(3):339~358
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Push-out tests on stud shear connectors with constrained structure of steel-concrete composite beams
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Review of stud shear resistance prediction in steel-concrete composite beams
Steel and Composite Structures, An International Journal
2018 .01
-
Pressure-Assisted Sinter-Bonding Characteristics at 250 °C in Air Using Bimodal Ag-Coated Cu Particles
Electronic Materials Letters
2020 .01
-
Experimental and numerical studies on the shear connectors in steel-concrete composite beams at fire and post fire exposures
Steel and Composite Structures, An International Journal
2021 .01
-
Shear capacity of stud shear connectors with initial damage: Experiment, FEM model and theoretical formulation
Steel and Composite Structures, An International Journal
2017 .01
-
단속배치된 캡 형상의 전단연결재의 전단내력에 관한 실험 연구
한국공간구조학회지
2018 .01
-
Shear stiffness of headed studs on structural behaviors of steel-concrete composite girders
Steel and Composite Structures, An International Journal
2020 .01
-
Shear transfer mechanism in connections involving concrete filled steel columns under shear forces
Steel and Composite Structures, An International Journal
2018 .01
-
Structural performance of steel-concrete composite bridges utilising innovative blind bolt shear connectors
Steel and Composite Structures, An International Journal
2021 .01
-
Distribution of shear force in perforated shear connectors
Steel and Composite Structures, An International Journal
2018 .01
-
FEM Analysis of RC Deep Beam Depending on Shear-Span Ratio
ARCHITECTURAL RESEARCH
2017 .12
-
전단 공정에서 클리어런스에 의한 고강도강판의 하중 및 전단면 변화에 관한 연구
한국소성가공학회 학술대회 논문집
2023 .11
-
Experimental and numerical study on static behavior of grouped large-headed studs embedded in UHPC
Steel and Composite Structures, An International Journal
2020 .01
-
Application of ANFIS technique on performance of C and L shaped angle shear connectors
Smart Structures and Systems, An International Journal
2018 .01
-
합성형 교량에서 전단연결재에 대한 정적실험 및 강도식의 제안
한국구조물진단유지관리공학회 논문집
2018 .01
-
Experimental studies on the behaviour of headed shear studs for composite beams in fire
Steel and Composite Structures, An International Journal
2019 .01
-
Influence of Shear Span-to-Effective Depth Ratio on Behavior of High‑Strength Reinforced Concrete Beams
International Journal of Concrete Structures and Materials
2021 .05
-
Sand-Nonwoven geotextile interfaces shear strength by direct shear and simple shear tests
Geomechanics & engineering
2015 .01
-
Bond-slip effect in steel-concrete composite flexural members: Part 2 ‒ Improvement of shear stud spacing in SCP
Steel and Composite Structures, An International Journal
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0