지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국계산역학회 Computers and Concrete, An International Journal Computers and Concrete, An International Journal Vol.26 No.1
- 발행연도
- 2020.1
- 수록면
- 1 - 10 (10page)
이용수
초록· 키워드
오류제보하기
In this paper, a procedure for automated optimized design of reinforced concrete frames has been presented. The procedure consists of formulation and solution of the design problem in the form of an optimization problem. The minimization of total cost of R/C frame has been taken as the objective of optimization problem. In this research, consistent approximation method is applied to explicitly formulate constraints and objective function in terms of the design variables. In the presented method, the primary optimization problem is replaced with a sequence of explicit sub-problems. Each sub-problem is efficiently solved using the Sequential Quadratic Programming (SQP) method. The proposed method is demonstrated through a four-story frame and an eight-story frame, and the optimum results are compared with those in the available literature. It is shown that the proposed method can be easily applied to obtain rational, reliable, economical and practical designs for Reinforced Concrete Moment Resisting Frames (RCMRFs) while it is converged after a few analyses.
목차
등록된 정보가 없습니다.
참고문헌 (29)
참고문헌 신청
2008 / ACI 318-08, Building Code Requirements for Structural Concrete and Commentary-ACI 318R-08 / American Concrete Institute
Booz, W. / 1984 / Optimization of reinforced concrete structures according to germa design regulations / Proceedings of the International Conference on Computer Aided Analysis and Design of concrete structures
Cohn, M. Z. / 1968 / Limit design of reinforced concrete frames / J. Struct. Div ST10:2467~2483
Fadaee, M. J. / 1996 / Design optimization of three dimensional reinforced concrete structures
Fatma, A. A. / 2014 / Multi-objective genetic optimization for scheduling a multi-storey building / Autom. Construct 44:119~128
Booz, W. / 1984 / Optimization of reinforced concrete structures according to germa design regulations / Proceedings of the International Conference on Computer Aided Analysis and Design of concrete structures
Cohn, M. Z. / 1968 / Limit design of reinforced concrete frames / J. Struct. Div ST10:2467~2483
Fadaee, M. J. / 1996 / Design optimization of three dimensional reinforced concrete structures
Fatma, A. A. / 2014 / Multi-objective genetic optimization for scheduling a multi-storey building / Autom. Construct 44:119~128
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Using genetic algorithms method for the paramount design of reinforced concrete structures
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Optimum cost design of frames using genetic algorithms
Steel and Composite Structures, An International Journal
2019 .01
-
Prediction of response of reinforced concrete frames exposed to fire
Advances in computational design
2016 .01
-
패널존 보강프레임을 활용한 철근콘크리트 골조의 내진성능 평가 및 개선
대한건축학회논문집
2020 .11
-
Use of design optimization techniques in solving typical structural engineering related design optimization problems
Structural engineering and mechanics : An international journal
2015 .01
-
전통목구조의 골조유형에 따른 수평내력 비교 고찰
대한건축학회논문집
2021 .07
-
패널존 보강 프레임을 활용한 기존 철근콘크리트 골조의 내진성능 개선
대한건축학회 학술발표대회 논문집
2018 .04
-
Confinement effect on the behavior factor of dual reinforced concrete moment-resisting systems with shear walls
Structural Engineering and Mechanics, An Int＇l Journal
2023 .03
-
Topology and Multi-Objective Structural Optimization of Frame Structure for a Mechanical Press with Capacity of 300 Ton
Journal of the Korean Society for Precision Engineering
2019 .03
-
Nonlinear analysis of reinforced concrete frame under lateral load
Coupled systems mechanics
2017 .01
-
Nonlinear analysis of reinforced concrete frame under lateral load
Coupled systems mechanics
2018 .01
-
철골 모멘트골조로 보강된 철근콘크리트 건물의 내진성능평가
한국지진공학회 논문집
2020 .09
-
한옥의 골조 배치방식에 따른 구조성능 고찰
대한건축학회논문집
2021 .08
-
Analysis of R/C frames considering cracking effect and plastic hinge formation
Structural engineering and mechanics : An international journal
2017 .01
-
Energy absorption of fibrous self compacting reinforced concrete system
Advances in concrete construction
2016 .01
-
Optimum design of shape and size of truss structures via a new approximation method
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Frame Mix-Up for Long-Term Temporal Context in Video Action Recognition
한국방송미디어공학회 학술발표대회 논문집
2022 .06
-
Analysis of R/C frames considering cracking effect and plastic hinge formation
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
Damage controlled optimum seismic design of reinforced concrete framed structures
Structural engineering and mechanics : An international journal
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0