메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Kangmyung Seo (Hanyang University) Ka‑hee Kim (Korea Advanced Nano Fab Center) Hee Jin Kim (KISWEL) Hoisoo Ryoo (Korea Institute of Industrial Technology (KITECH)) Glyn M. Evans (독립연구자) Changhee Lee (Hanyang University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.26 No.8
발행연도
2020.1
수록면
1,226 - 1,234 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
To better determine the lower limit of titanium content for the formation of acicular ferrite, C–Mn steel welds varying thetitanium concentration at a minimal level from nearly zero to about 30 ppm have been investigated. Optical and SEM observationsof as-deposited weld microstructures showed that when the titanium content increased from 1 to 9 ppm or higher,a dramatic change in weld microstructure from one dominant with ferrite with second phase to one with acicular ferritetakes place, being attributed to a concurrent increase in nucleation potency of inclusions for acicular ferrite plates. Theseresults suggest that the critical limit of titanium required is about 9 ppm or even lower for the present weld system. In TEM,the inclusions of titanium-containing welds were found to be partly covered with a titanium-rich phase, indicating that thisphase plays an important role in promoting the nucleation ability of inclusions and thus in developing a weld microstructurecomposed of a high proportion of acicular ferrite.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0