지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.1
- 수록면
- 2,512 - 2,529 (18page)
이용수
초록· 키워드
오류제보하기
The ability of four constitutive equations, Johnson–Cook (JC), Zerilli–Armstrong (ZA), Arrhenius-type constitutive equationsand a newly developed phenomenological model for describing the hot flow behavior of 1.4542 stainless steel was evaluated. The hot flow curves were obtained from hot compression tests in the temperature range of 900–1050 °C and at strain ratesof 0.001–1 s−1. The JC model was not able to predict the softening part of the flow curves owing to the separated effects ofstrain, strain rate and temperature on the flow stress. The original ZA model was found to be useful at large strains but theoverall consistency between the experimental and the calculated flow curves was not good. The subsequent modifications ofthe ZA model for low strain levels resulted in acceptable predictions. It is observed that the Arrhenius-type predicted flowcurves well agree with the experimental results especially at low strain rates. However, at high strain rates where the steadystate condition is shifted to large strains, some deviations were observed at low strain levels. Finally, a phenomenologicalmodel was constructed based on the nonlinear estimation of work hardening. The flow curves developed by the model couldpredict the experimental ones with satisfactory precision.
목차
등록된 정보가 없습니다.
참고문헌 (1)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Kinetics and Critical Conditions for Initiation of Dynamic Recrystallization During Hot Compression Deformation of AISI 321 Austenitic Stainless Steel
Metals and Materials International
2017 .01
-
Hot Deformation Behavior and Dynamic Recrystallization of a Medium Carbon Cr–Mo Steel for Class 16.8 Bolts
Metals and Materials International
2024 .01
-
홉킨슨바 시편의 strain rate equation 에 의한 stress-strain 곡선과 rate-strain 곡선의 상호 연관성
한국정밀공학회 학술발표대회 논문집
2015 .05
-
금속소재의 고변형률 영역 유동응력선도 평가
소성·가공
2020 .12
-
Characterization of Hot Deformation Behavior and Processing Map of As?Cast H13 Hot Work Die Steel
Metals and Materials International
2021 .09
-
변형률 속도에 따른 Fe-24.5Mn-4Cr-0.45C 합금의 인장 특성과 동적 변형시효
한국재료학회지
2016 .01
-
A Comparative Study on Arrhenius-Type Constitutive Models with Regression Methods
소성·가공
2017 .02
-
Evaluation of Flow Stress Curve in High Strain Region
한국소성가공학회 학술대회 논문집
2021 .11
-
Determination of true stress-strain curve of type 304 and 316 stainless steels using a typical tensile test and fi nite element analysis
Nuclear Engineering and Technology
2021 .02
-
오스테나이트계 스테인리스스틸의 상변태에 따른 Stress-strain Curve의 거동
대한용접학회 특별강연 및 학술발표대회 개요집
2018 .04
-
Physically-Based Constitutive Modelling of As-Cast CL70 Steel for Hot Deformation
Metals and Materials International
2021 .01
-
Hot Deformation Characteristic and Strain Dependent Constitutive Flow Stress Modelling of Ti + Nb Stabilized Interstitial Free Steel
Metals and Materials International
2021 .01
-
Modeling the Stress–Strain Curves and Dynamic Recrystallization of Nickel-Based A230 Alloy During Hot Deformation
Metals and Materials International
2022 .12
-
Coupled Effect of Temperature and Strain Rate on Mechanical Properties of Steel Fiber‑Reinforced Concrete
International Journal of Concrete Structures and Materials
2020 .09
-
공구강의 고온 변형 거동 예측을 위한 모델 비교 연구
열처리공학회지
2018 .01
-
고변형률 영역 유효변형률-유효응력 선도 평가
한국기계가공학회 춘추계학술대회 논문집
2020 .11
-
유한요소해석을 위한 재료의 진응력-진변형률 커브 피팅 방법론
소성·가공
2022 .08
-
Quantitative Analysis of Strength and Plasticity of a 304 Stainless Steel Based on the Stress-strain Curve
Metals and Materials International
2016 .01
-
오스테나이트계 스테인리스강의 화학성분에 따른 변형유기 마르텐사이트 변태와 인장응력-변위 곡선의 거동
대한용접·접합학회지
2018 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0