메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Sin-Woo Lee (Inha University) Mok-Soon Kim (Inha University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.22 No.4
발행연도
2016.1
수록면
579 - 584 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The high temperature deformation behavior of spray-formed and subsequently extruded Al-25Si based alloy containing fine Si and ultra-fine intermetallic phases was examined by compressive tests at temperatures between 523 and 743 K and strain rates between 1.0 × 10 -3 and 1.0 × 10 0 /s. The true stress-true strain curves obtained from the compressive tests revealed a peak stress at the initial stage of deformation. The peak stress decreased with increasing temperature or decreasing strain rate. A close relationship was observed between the peak stress and the constitutive equation for high temperature deformation. In the deformed specimens, fine equiaxed grains were observed with a mean grain size of 330~590 nm, which was much finer than that measured prior to deformation (1.4 μm). A dislocation structure within the grains was also observed in the deformed specimens, indicating the occurrence of dynamic recrystallization during high temperature deformation of the present alloy. The occurrence of dynamic recrystallization was also supported by the existence of a peak stress in the flow curve.

목차

등록된 정보가 없습니다.

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0