메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Nikolay G. Razumov (Peter the Great Saint-Petersburg Polytechnic University) Anatoly A. Popovich (Peter the Great Saint-Petersburg Polytechnic University) QingSheng Wang (ENV (Zheijang) New Energy Material Technology Research Institute)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.24 No.2
발행연도
2018.1
수록면
363 - 370 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
This paper presents the results of experimental studies on the treatment of Fe–23Cr–11Mn–1N high-nitrogen stainlesssteel powder alloys, synthesized by the mechanical alloying (MA) of elemental powders in the flow of a thermal plasma. Fe–23Cr–11Mn–1N high-nitrogen stainless steel powder alloys were prepared by MA in the attritor under an argon atmosphere. For spheroidization of Fe–23Cr–11Mn–1N high-nitrogen stainless steel powder alloys, the TekSphero 15 plantmanufactured by Tekna Plasma Systems Inc was used. The studies have shown the possibility of obtaining Fe–23Cr–11Mn–1N high-nitrogen spherical powders steel alloys from the powder obtained by MA. According to the results of a series ofexperiments, it was found that the results of plasma spheroidization of powders essentially depend on the size of the fractiondue to some difference in the particle shape and flowability, and on the gas regime of the plasma torch. It is established thatduring the plasma spheroidization process, some of the nitrogen leaves the alloy. The loss rate of nitrogen depends on thesize of the initial particles.

목차

등록된 정보가 없습니다.

참고문헌 (21)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0