지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.1
- 수록면
- 414 - 421 (8page)
이용수
초록· 키워드
오류제보하기
Study Design: Biomechanical study. Purpose: To determine the effect of density, insertion angle and reinsertion on pull-out strength of pedicle screw in single and two screw-rod configurations. Overview of Literature: Pedicle screw pull-out studies have involved single screw construct, whereas two screws and rod constructs are always used in spine fusions. Extrapolation of results using the single screw construct may lead to using expensive implants or increasing the fusion levels specifically in osteoporotic bones. Methods: Single screw and two screw pull-out strength tests were carried out according to American Society for Testing and Materials F 543-07 on foam models to test the effect of density, insertion angle and reinsertion using poly axial pedicle screws. Results: Bone density was the most significant factor deciding the pull-out strength in both single and two screw constructs. The difference in pull-out strength between single screw and two screw configurations in extremely osteoporotic bone model (80 kg/m3) was 78%, whereas in the normal bone model it was 48%. Axial pull-out value was highest for the single screw configuration; in the two screw configuration the highest pull-out strength was at 10°–15°. There was an 18% reduction in pull-out strength due to reinsertion in single screw configuration. The reinsertion effect was insignificant in the two screw configuration. Conclusions: A significant difference in response of various factors on holding power of pedicle screw between single and two-screw configurations is evident. The percentage increase in pull-out strength between single and two screw constructs is higher for osteoporotic bone when compared to normal bone. Reinsertion has no significant effect on pull-out strength in the two screw rod configuration.
목차
등록된 정보가 없습니다.
참고문헌 (1)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Impact of Screw Diameter and Length on Pedicle Screw Fixation Strength in Osteoporotic Vertebrae: A Finite Element Analysis
Asian Spine Journal
2021 .10
-
나사 파단 예방을 위해 새로 디자인한 경비 인대 결합 나사의 효용성: 생역학 연구
대한족부족관절학회지
2020 .01
-
Floor-Mounted Robotic Pedicle Screw Placement in Lumbar Spine Surgery: An Analysis of 1,050 Screws
Neurospine
2023 .06
-
An Innovative Universal Screw Removal Instrument
Neurospine
2015 .01
-
Fixation Strength of Caudal Pedicle Screws after Posterior Lumbar Interbody Fusion with the Modified Cortical Bone Trajectory Screw Method
Asian Spine Journal
2016 .01
-
Comparison of the Pullout Strength of Different Pedicle Screw Designs and Augmentation Techniques in an Osteoporotic Bone Model
Asian Spine Journal
2018 .01
-
Utilization of Spinal Navigation to Facilitate Hassle-Free Rod Placement during Minimally-Invasive Long-Construct Posterior Instrumentation
Asian Spine Journal
2019 .01
-
척추경 나사못의 디자인이 고정력 및 구동 토크에 미치는영향 분석: 이중 나사 및 이중 피치 나사
의공학회지
2018 .01
-
Biodegradable Screws Containing Bone Morphogenetic Protein-2 in an Osteoporotic Rat Model
대한신경외과학회지
2018 .01
-
A Prospective Study on the Feasibility, Safety, and Efficacy of a Modified Technique to Augment the Strength of Pedicle Screw in Osteoporotic Spine Fixation
Asian Spine Journal
2020 .01
-
Freehand S2 Alar-Iliac Screw Placement Using K-Wire and Cannulated Screw : Technical Case Series
대한신경외과학회지
2018 .01
-
Incidence and Risk Factors of the Caudal Screw Loosening after Pelvic Fixation for Adult Spinal Deformity: A Systematic Review and Meta-analysis
Asian Spine Journal
2024 .02
-
Pullout Strength after Expandable Polymethylmethacrylate Transpedicular Screw Augmentation for Pedicle Screw Loosening
대한신경외과학회지
2015 .01
-
Lateral Mass Screw Fixation in the Cervical Spine: Introducing a New Technique
Asian Spine Journal
2021 .12
-
Simultaneous Use of Both Bilateral Intralaminar and Pedicle Screws for C2 Stabilization
Asian Spine Journal
2015 .01
-
A Computed Tomography-Based Assessment of the Anatomical Parameters Concerning S2-Alar Iliac Screw Insertion Using “Safe Trajectory Method” in Indian Population
Asian Spine Journal
2023 .02
-
척추의 해부학적 요소를 고려한 척추경 나사못 디자인의 Pullout 특성 연구
의공학회지
2021 .01
-
지대주 나사 풀림 방지를 위한 새로운 Lock Screw 시스템의 효과에 대한 유한요소해석적 연구
구강회복응용과학지
2019 .09
-
Clinical impact of glenoid baseplate screw penetrations in reverse total shoulder arthroplasty
대한견주관절의학회 학술대회논문집
2021 .03
-
Risk Factors of Unsatisfactory Robot-Assisted Pedicle Screw Placement: A Case-Control Study
Neurospine
2021 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0