메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이정한 (한국생산기술연구원) 박현국 (한국생산기술연구원)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第39卷 第6號
발행연도
2021.12
수록면
625 - 631 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Spark plasma sintering method (SPS) is a new rapid sintering method developed recently for the fabrication of ceramics and composites. This method provides an advantage for sintering high-temperature materials by applying high temperature and pressure in a short time using a direct pulsed current. In this study, Binderless-WC, WC-6 wt.%Co, WC-6 wt.%Co-1 wt.% Si₃N₄ and WC-6 wt.%Co-2.5 wt.% Si₃N₄ hard materials were densified using a horizontal ball-milled WC-Co, WC-Co-Si₃N₄ powders, and spark plasma sintering process (SPS process). Each SPSed Binderless-WC, WC-6 wt.%Co-1 wt.% Si₃N₄ and WC-6 wt.%Co-2.5 wt.% Si₃N₄ hard materials were almost completely dense with a relative density of up to 99.2 % after the simultaneous application of a pressure of 60 ㎫. The average crystallite size of WC for Binderless-WC, WC-6 wt.%Co-1 wt.% Si₃N₄ and WC-6 wt.%Co-2.5 wt.% Si₃N₄ hard materials were about 41.8, 27.4, 30.8, and 38.2 nm, respectively. Mechanical properties, microstructure, and phase analysis of SPSed Binderless-WC, WC-6 wt.%Co-1 wt.% Si₃N₄ and WC-6 wt.%Co-2.5 wt.% Si₃N₄ hard materials were investigated.

목차

Abstract
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (19)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-581-000061036