지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.12
- 수록면
- 437 - 441 (5page)
- DOI
- 10.4283/JMAG.2021.26.4.437
이용수
초록· 키워드
오류제보하기
A new detector was designed to improve the spatial resolution of positron emission tomography (PET) and acquire digital coordinates of the detector"s scintillation pixels. In order to solve the spatial resolution deterioration phenomenon due to parallax error occurring outside the field of view (FOV), a method of measuring the depth of interaction was developed, and this was accomplished with the acquisition of digital coordinates. A detector using a 4 × 4 × 2 GAGG scintillator was designed using the DETECT2000 simulation tool to acquire digital coordinates of the scintillation pixels and measure the depth of interaction of the two layers. A gamma-ray reaction was generated in all the scintillation pixels, and the signals were obtained from SiPM pixels in a 4 × 4 array. The 16-channels of optical sensor signals were reduced to signals of 4 channels, and these were calculated as a ratio of each signal. The ratio of the signal was obtained from all the flash pixels, and the position was obtained as digital coordinates by comparing it with the ratio of the signal by the gamma ray response generated at the new position. In order to evaluate the accuracy of acquiring the digital coordinates and the accuracy of the layer where the scintillation pixel in which the scintillator and the gamma ray reacted, a signal was obtained by generating a gamma ray response for the entire length of each scintillation pixel. Gamma-ray reactions were generated at intervals of 0.2 mm from 0.1 mm to 19.9 mm. The obtained signals through these reactions were compared with the signals of each scintillation pixel obtained in advance. Then, the accuracy of measured positions on the X, Y, and Z axes were evaluated. The accuracy of both the X and Y axis showed perfect results, and the accuracy of the Z axis was 91.46 %.
목차
1. Introduction
2. Material and Methods
3. Results
4. Discussion and Conclusion
References
참고문헌 (11)
참고문헌 신청
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2022-428-000146067