지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.54 No.1
- 발행연도
- 2015.1
- 수록면
- 69 - 85 (17page)
이용수
초록· 키워드
오류제보하기
In this paper, a receding contact problem for an elastic layer resting on two quarter planes is considered. The layer is pressed by a stamp and distributed loads. It is assumed that the contact surfaces are frictionless and only compressive traction can be transmitted through the contact surfaces. In addition the effect of body forces are neglected. Firstly, the problem is solved analytically based on theory of elasticity. In this solution, the problem is reduced into a system of singular integral equations in which contact areas and contact stresses are unknowns using boundary conditions and integral transform techniques. This system is solved numerically using Gauss-Jacobi integral formulation. Secondly, two dimensional finite element analysis of the problem is carried out using ANSYS. The dimensionless quantities for the contact areas and the contact pressures are calculated under various distributed load conditions using both solutions. It is concluded that the position and the magnitude of the distributed load have an important role on the contact area and contact pressure distribution between layer and quarter plane contact surface. The analytic results are verified by comparison with finite element results.
목차
등록된 정보가 없습니다.
참고문헌 (29)
참고문헌 신청
Aksogan, O. / 1996 / A comparative study of the contact problem for an elastic layer supported by two elastic quarter planes / J. Facul. Eng. Arch. Çukurova Univ 11:25~31
Aksogan, O. / 1997 / A comparative study of the contact problem for an elastic layer supported by two elastic quarter planes / J. Facul. Eng. Arch. Çukurova Univ 12:1~13
Anderson, T. / 1982 / The Boundary Element Method Applied to Two-Dimensional Contact Problems with Friction, Boundary Element Methods / Springer
Cakıroglu, E. / 2011 / The solution of an elastic layer resting on two quarter planes and loaded by means of rigid stamp and application of the artificial neural network method
Civelek, M.B. / 1974 / The axisymmetric double contact problem for a frictionless elastic layer / Int. J. Solid. Struct 10(6):639~659
Aksogan, O. / 1997 / A comparative study of the contact problem for an elastic layer supported by two elastic quarter planes / J. Facul. Eng. Arch. Çukurova Univ 12:1~13
Anderson, T. / 1982 / The Boundary Element Method Applied to Two-Dimensional Contact Problems with Friction, Boundary Element Methods / Springer
Cakıroglu, E. / 2011 / The solution of an elastic layer resting on two quarter planes and loaded by means of rigid stamp and application of the artificial neural network method
Civelek, M.B. / 1974 / The axisymmetric double contact problem for a frictionless elastic layer / Int. J. Solid. Struct 10(6):639~659
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Analytical and finite element solution of a receding contact problem
Structural engineering and mechanics : An international journal
2015 .01
-
A receding contact problem of a layer resting on a half plane
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
A receding contact problem of a layer resting on a half plane
Structural engineering and mechanics : An international journal
2017 .01
-
Finite element modeling of contact between an elastic layer and two elastic quarter planes
Computers and Concrete, An International Journal
2020 .01
-
Receding contact problem of an orthotropic layer supported by rigid quarter planes
Structural Engineering and Mechanics, An Int＇l Journal
2024 .09
-
On the receding contact between a two-layer inhomogeneous laminate and a half-plane
Structural engineering and mechanics : An international journal
2018 .01
-
The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch
Steel and Composite Structures, An International Journal
2022 .06
-
On the receding contact plane problem for bi-FGM-layers indented by a flat indenter
Structural Engineering and Mechanics, An Int＇l Journal
2023 .03
-
Analytical solution of a contact problem and comparison with the results from FEM
Structural engineering and mechanics : An international journal
2015 .01
-
Analysis of material dependency in an elastic - plastic contact models using contact mechanics approach
Structural engineering and mechanics : An international journal
2015 .01
-
Analytical solution of a contact problem and comparison with the results from FEM
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
Analysis of material dependency in an elastic - plastic contact models using contact mechanics approach
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
트라이볼로지 손상을 억제하기 위한 구조물 모서리부 설계 : 제1부 - 설계공식 개발
Tribology and Lubricants
2015 .08
-
군을 이루는 접촉면 분포에 따른 전기접촉저항
한국트라이볼로지학회 학술대회
2017 .10
-
Behaviors of turn-to-turn contact resistance (R<sub>c</sub>) of various REBCO CC tapes according to applied contact pressure
한국초전도·저온공학회논문지
2018 .01
-
Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Continuous and discontinuous contact problem of a magneto-electro-elastic layer
Structural Engineering and Mechanics, An Int＇l Journal
2022 .07
-
보행 모의 실험을 위한 발목 없는 하지 외골격 로봇의 지면 접촉 모델 최적화
로봇학회 논문지
2023 .12
-
주기 하중과 탄소성 조건에서 리시딩 접촉 거동에 대한 연구
한국트라이볼로지학회 학술대회
2020 .09
-
Study on the Contact Load of Three-Point Contact Ball Bearings under Combined Loading
한국정밀공학회 학술발표대회 논문집
2022 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0