지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.18 No.4
- 발행연도
- 2015.1
- 수록면
- 1,001 - 1,021 (21page)
이용수
초록· 키워드
오류제보하기
Ultra-lightweight cement composite (ULCC) with a compressive strength of 60 MPa and density of 1,450 kg/㎥ has been developed and used in the steel-concrete-steel (SCS) sandwich structures. This paper investigates the structural performances of SCS sandwich composite beams with ULCC as filled material. Overlapped headed shear studs were used to provide shear and tensile bond between the face plate and the lightweight core. Three-dimensional nonlinear finite element (FE) model was developed for the ultimate strength analysis of such SCS sandwich composite beams. The accuracy of the FE analysis was established by comparing the predicted results with the quasi-static tests on the SCS sandwich beams. The FE model was also applied to the nonlinear analysis on curved SCS sandwich beam and shells and the SCS sandwich beams with J-hook connectors and different concrete core including ULCC, lightweight concrete (LWC) and normal weight concrete (NWC). Validations were also carried out to check the accuracy of the FE analysis on the SCS sandwich beams with J-hook connectors and curved SCS sandwich structure. Finally, recommended FE analysis procedures were given.
목차
등록된 정보가 없습니다.
참고문헌 (26)
참고문헌 신청
ABAQUS / 2009 / User manual Version 6.9 / DS SIMULIA Corp
CEB-FIP / 1993 / CEB-FIP model code 1990; Comité Euro-International Du Béton / Redwood Books
Chang, X. / 2011 / Modeling of anchor bolt pullout in concrete based on a heterogeneous assumption / Nucl. Eng. Des 241(5):1345~1351
Dai, X.X. / 2010 / Fatigue performance of lightweight steel–concrete–steel sandwich systems / J. Constr. Steel Res 66(2):256~276
Foundoukos, N. / 2008 / Finite element analysis of steel–concrete–steel sandwich beams / J. Constr. Steel Res 64(9):947~961
CEB-FIP / 1993 / CEB-FIP model code 1990; Comité Euro-International Du Béton / Redwood Books
Chang, X. / 2011 / Modeling of anchor bolt pullout in concrete based on a heterogeneous assumption / Nucl. Eng. Des 241(5):1345~1351
Dai, X.X. / 2010 / Fatigue performance of lightweight steel–concrete–steel sandwich systems / J. Constr. Steel Res 66(2):256~276
Foundoukos, N. / 2008 / Finite element analysis of steel–concrete–steel sandwich beams / J. Constr. Steel Res 64(9):947~961
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Numerical studies of steel-concrete-steel sandwich walls with J-hook connectors subjected to axial loads
Steel and Composite Structures, An International Journal
2016 .01
-
Development of super convergent Euler finite elements for the analysis of sandwich beams with soft core
Structural engineering and mechanics : An international journal
2018 .01
-
Dynamic/static stability characteristics of sandwich FG porous beams
Steel and Composite Structures, An International Journal
2023 .01
-
Numerical study of steel sandwich plates with RPF and VR cores materials under free air blast loads
Steel and Composite Structures, An International Journal
2018 .01
-
Forced vibration analysis of functionally graded sandwich deep beams
Coupled systems mechanics
2019 .01
-
A high-order closed-form solution for interfacial stresses in externally sandwich FGM plated RC beams
Advances in materials research : AMR
2017 .01
-
An analytical method for free vibration analysis of functionally graded sandwich beams
Wind & structures
2016 .01
-
Comparative study on the bending of exponential and sigmoidal sandwich beams under thermal conditions
Structural Engineering and Mechanics, An Int＇l Journal
2023 .01
-
Numerical analysis of thermal post-buckling strength of laminated skew sandwich composite shell panel structure including stretching effect
Steel and Composite Structures, An International Journal
2020 .01
-
Experimental and numerical study on energy absorption of lattice-core sandwich beam
Steel and Composite Structures, An International Journal
2018 .01
-
Finite element model for interlayer behavior of double skin steel-concrete-steel sandwich structure with corrugated-strip shear connectors
Steel and Composite Structures, An International Journal
2018 .01
-
Analytical, numerical and experimental investigation of low velocity impact response of laminated composite sandwich plates using extended high order sandwich panel theory
Structural engineering and mechanics : An international journal
2018 .01
-
A new higher-order shear and normal deformation theory for functionally graded sandwich beams
Steel and Composite Structures, An International Journal
2015 .01
-
On dynamic deflection analysis of sandwich beams under thermal and pulse loads
Steel and Composite Structures, An International Journal
2023 .01
-
Flexural performance of composite walls under out-of-plane loads
Steel and Composite Structures, An International Journal
2020 .01
-
Distortion Control of Stud Welding in Sandwich Concrete Plate
대한용접학회 특별강연 및 학술발표대회 개요집
2015 .11
-
A numerical study on nonlinear stability of higher-order sandwich beams with cellular core and nanocomposite face sheets
Structural Engineering and Mechanics, An Int＇l Journal
2022 .08
-
자동차용 경량 알루미늄 5182 합금 및 샌드위치 판재의 성형성 평가
한국기계기술학회지
2018 .01
-
Free vibration of various types of FGP sandwich plates with variation in porosity distribution
Structural Engineering and Mechanics, An Int＇l Journal
2023 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0