지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.19 No.3
- 발행연도
- 2015.1
- 수록면
- 661 - 678 (18page)
이용수
초록· 키워드
오류제보하기
Buckling Restrained Braces (BRB) have been widely used in the construction industry as they utilize the most desirable properties of both constituent materials, i.e., steel and concrete. They present excellent structural qualities such as high load bearing capacity, ductility, energy-absorption capability and good structural fire behaviour. The effects of size and type of filler material in the existed gap at the steel core-concrete interface as well as the element's cross sectional shape, on BRB's fire resistance capacity was investigated in this paper. A nonlinear sequentially-coupled thermal-stress three-dimensional model was presented and validated by experimental results. Variation of the samples was described by three groups containing, the steel cores with the same cross section areas and equal yield strength but different materials (metal and concrete) and sizes for the gap. Responses in terms of temperature distribution, critical temperature, heating elapsed time and contraction level of BRB element were examined. The study showed that the superior fire performance of BRB was obtained by altering the filler material in the gap from metal to concrete as well as by increasing the size of the gap. Also, cylindrical BRB performed better under fire conditions compared to the rectangular cross section.
목차
등록된 정보가 없습니다.
참고문헌 (24)
참고문헌 신청
ABAQUS / 2008 / ABAQUS analysis user’s manual / SIMULIA
Asgarian, B. / 2009 / BRBF response modification factor / J. Construct. Steel Res 65(2):290~298
Clark, P. / 1999 / Design procedures for buildings incorporating hysteretic damping devices / Proceeding of 69th Annual Convention
Espinos, A. / 2011 / Fire behaviour of concrete filled elliptical steel columns / J. Thin-Wall. Struct 49(2):239~255
2005 / Design of steel structures-part 1-2: general rules -structural fire design / British Standards Institution, BS EN 1993-1-2
Asgarian, B. / 2009 / BRBF response modification factor / J. Construct. Steel Res 65(2):290~298
Clark, P. / 1999 / Design procedures for buildings incorporating hysteretic damping devices / Proceeding of 69th Annual Convention
Espinos, A. / 2011 / Fire behaviour of concrete filled elliptical steel columns / J. Thin-Wall. Struct 49(2):239~255
2005 / Design of steel structures-part 1-2: general rules -structural fire design / British Standards Institution, BS EN 1993-1-2
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
A review on BRB and SC-BRB members in building structures
Structural Engineering and Mechanics, An Int＇l Journal
2021 .12
-
Study on fatigue life and mechanical properties of BRBs with viscoelastic filler
Steel and Composite Structures, An International Journal
2018 .01
-
Buckling-restrained brace with CFRP encasing: Mechanical behavior & cyclic response
Steel and Composite Structures, An International Journal
2018 .01
-
Hysteretic performance of the all-steel buckling-restrained brace with LY315 steel core
Steel and Composite Structures, An International Journal
2022 .09
-
Design and Applications of Buckling-Restrained Braces
International journal of high-rise buildings
2018 .01
-
An innovative BRB with viscoelastic layers: performance evaluation and numerical simulation
Structural monitoring and maintenance
2018 .01
-
Feasibility study of buckling-restrained braces with PM-35 steel core
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Improving the behavior of buckling restrained braces through obtaining optimum steel core length
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Prequalification of a set of buckling restrained braces: Part I - experimental tests
Steel and Composite Structures, An International Journal
2020 .01
-
Review of Buckling-Restrained Brace Design and Application to Tall Buildings
International journal of high-rise buildings
2018 .01
-
강재 조립형 이중보강재를 가지는 좌굴방지가새의 이력특성
대한건축학회 논문집 - 구조계
2016 .01
-
Improving the behavior of buckling restrained braces through obtaining optimum steel core length
Structural engineering and mechanics : An international journal
2018 .01
-
Self-centering BRBs with composite tendons in series: Tests and structural an
Steel and Composite Structures, An International Journal
2021 .01
-
멀티코어를 사용한 BRB의 성능 평가
한국콘크리트학회 학술대회 논문집
2017 .05
-
Design of buckling restrained braces with composite technique
Steel and Composite Structures, An International Journal
2020 .01
-
Prequalification of a set of buckling restrained braces: Part II – numerical simulations
Steel and Composite Structures, An International Journal
2020 .01
-
Finite element analysis of NOVEL buckling restrained brace with light weight and rapid hardening filler material.
한국강구조학회 학술대회 발표집
2019 .05
-
Flange Local Buckling Behaviour of All-Steel Buckling Restrained Brace with H-Section Core
한국강구조학회 학술대회 발표집
2021 .06
-
Network Intrusion Detection Based on Directed Acyclic Graph and Belief Rule Base
[ETRI] ETRI Journal
2017 .08
-
Local and global buckling condition of all-steel buckling restrained braces
Steel and Composite Structures, An International Journal
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0