메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한금속·재료학회 Electronic Materials Letters Electronic Materials Letters Vol.10 No.2
발행연도
2014.1
수록면
345 - 349 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Anodic TiO2 nanotube (TONT) with various morphological features was developed by simple electrochemical anodization in the variation of applied voltage where the morphological properties such as pore diameter, wall thickness, and inter-tube spacing can be adjusted to survey the influence on the photoelectrochemical (PEC) activity. Thus, in the applied voltage from 20 V to 60 V at different reaction times, the identical thickness of 3.0 ± 0.2 μm was maintained. From the field-emission scanning electron microscopy, the geometric factors were compared and the porosity of TONT films was calculated. The results demonstrated that the porosity of TONT film grown at 20 V (denoted as 20 V) is the highest and that the porosity steadily reduced with increasing applied voltage. On the basis of these geometric factors, the PEC performance of TONT film (20 V) shows the highest photocurrent of 1.64 mA/cm2 at 0 V vs. Ag/AgCl. This was attributed to the lowest series resistance due to the high porosity for the hole or ions pathway and to the high crystallite size for the beneficial charge transport. On the other hand, TONT films (above 40 V) exhibit a similar photocurrent with high series resistance for opposite reasons.

목차

등록된 정보가 없습니다.

참고문헌 (14)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0