메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
강우석 (성균관대학교) 조현빈 (성균관대학교) 김태영 (포항산업과학연구원) 조한창 (포항산업과학연구원) 류창국 (성균관대학교)
저널정보
한국연소학회 KOSCO SYMPOSIUM 논문집 2020년도 한국연소학회 제60회 춘추계통합학술대회 KOSCO SYMPOSIUM 초록집
발행연도
2020.9
수록면
187 - 190 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Some off-gases from a steel making process contains high concentration of CO which requires to be removed by oxidation at the flare stack. One way to achieve this is to install oxy-combustion gas burner at the shield of the flare stack for ignition of the off-gas. Using computational fluid dynamics (CFD), this study investigates the influences of design and operation parameters for the flare stack including different levels of CO concentration in the off-gas, tilting and yawing of four oxy-combustion gas burners, wind speed, pre-mixing of natural gas. The off-gas was difficult to maintain the flame because of its low energy content and excessive cooling by large volume of entrained air despite the use of oxy-combustion burner for heat-up and ignition. The flame was maintained only when the CO concentration in the off-gas was over 25% at the quiescent air condition, which achieved 99.7% of CO removal. Adjusting the burner angle was helpful in increasing CO oxidation inside the shield but was not successful in keeping the flame above. Pre-mixing natural gas inside the stack also increased the level of CO oxidation but has a cost issue. The optimal condition for near-complete CO oxidation were determined from the combustion efficiency and safety of the flare stack.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0