메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
최민규 (Chung-Ang University) 송승호 (Korea Railroad Research Institute) 류홍제 (Chung-Ang University)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제71권 제9호
발행연도
2022.9
수록면
1,237 - 1,242 (6page)
DOI
10.5370/KIEE.2022.71.9.1237

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
This paper deals with the integrated 5 kW xenon flash lamp power supply. In order to drive a xenon lamp used in an application field of light sintering of printed electronics, the power supply in consideration of load characteristics is required. The simmer power supply that maintains the xenon lamp"s ignition is designed based on an LCC resonant converter with both voltage and current source characteristics. Also, an auxiliary rectifier and trigger applying high voltage are required to ignite the xenon lamp. And the power supply is designed based on a boost-type resonance circuit and a Cockcroft Walton voltage multiplier, respectively, in consideration of sharing the inverter with the simmer. This paper analyzes the topology of the proposed power supplies and selects the parameters and confirms them through simulation. Finally it was verified through experiments that the output voltages of the simmer, the auxiliary rectifier, and the trigger were 20 V, 400 V, and 10 kV, respectively.

목차

Abstract
1. 서론
2. 회로 구성
3. 시뮬레이션 결과
4. 실험 결과
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-560-001689057