메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이성현 (Korea Institute of Machinery & Materials) 마평식 (Korea Institute of Machinery & Materials) 우정한 (Korea Institute of Machinery & Materials) 서효선 (Unison Technology) 장강석 (Unison Technology) 이석규 (LIG Nex1)
저널정보
한국소음진동공학회 한국소음진동공학회논문집 한국소음진동공학회논문집 제32권 제5호(통권 268호)
발행연도
2022.10
수록면
445 - 451 (7page)
DOI
10.5050/KSNVE.2022.32.5.445

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In order to manage a ship’s underwater radiated noise, it is necessary to monitor it through a sensor attached to the hull. The underwater radiated noise can be predicted using the acceleration levels and radiation efficiency of the submerged plate. The areas of submerged plates are too large to be covered by a limited number of sensors. Moreover, some areas are inaccessible due to the tank structure on the bottom of ship. For accurate noise prediction, numerical calculations and measurements are used to investigate the appropriate number and locations of accelerometers. Numerical analysis shows that the vibration level changes sensitively with position. The acceleration levels obtained by all submerged plates are different from those by submerged side wall plates only. This means that the sensor location should be chosen so that errors are minimized when predicting under-water radiated noise. Vibration distribution is studied by measurement. Owing to the constraint of the number of channels, only the longitudinal distribution is investigated. Acceleration has different levels depending on location and frequency. Appropriate numbers and positions are suggested to represent the acceleration level of the entire submerged plate.

목차

ABSTRACT
1. 서론
2. 접수판의 진동 분포 해석
3. 접수판의 진동 분포 계측
4. 결론
References

참고문헌 (9)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2023-424-000104972