지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.6
- 수록면
- 236 - 243 (8page)
이용수
초록· 키워드
오류제보하기
Monocrystalline silicon has excellent properties, but it is difficult to design and manufacture silicon-based mirrors that can meet engineering applications because of its hard and brittle properties. This paper used monocrystalline silicon as the main mirror material in an imaging system to carry out a feasibility study. The lightweight design of the mirror is completed by the method of center support and edge cutting. The support structure of the mirror was designed to meet the conditions of wide temperature applications. Isight software was used to optimize the feasibility sample, and the optimized results are that the root mean square error of the mirror surface is 3.6 ㎚, the rigid body displacement of the mirror is 2.1 ㎛, and the angular displacement is 2.5″ under the conditions of a temperature of Δ20 ℃ and a gravity load of 1 g. The optimized result show that the silicon-based mirror developed in this paper can meet the requirements of engineering applications. This research on silicon-based mirrors can provide guidance for the application of other silicon-based mirrors.
목차
Ⅰ. INTRODUCTION
Ⅱ. MIRROR STRUCTURE DESIGN
Ⅲ. FLEXIBLE SUPPORT COMPONENTS
Ⅳ. CONCLUSION
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Optical-Loss Measurement of a Silicon-Slab Waveguide
Current Optics and Photonics
2020 .12
-
Optical Design of an Image-space Telecentric Two-mirror System for Wide-field Line Imaging
Current Optics and Photonics
2017 .08
-
Design of All-SiC Lightweight Secondary and Tertiary Mirrors for Use in Spaceborne Telescopes
Current Optics and Photonics
2022 .02
-
ITER 톰슨산란 진단계 및 first mirror 건전성 기술 추적 및 관련 실험 진행사항
한국진공학회 학술발표회초록집
2016 .02
-
New Bending System Using a Segmented Vacuum Chuck for Stressed Mirror Polishing of Thin Mirrors
Current Optics and Photonics
2017 .12
-
Ring isomorphisms between closed strings via homological mirror symmetry
대한수학회지
2022 .03
-
Optical System Design for a Head-up Display Using Aberration Analysis of an Off-axis Two-mirror System
Current Optics and Photonics
2016 .08
-
A Novel Axial Foldable Mechanism for a Segmented Primary Mirror of Space Telescope
Journal of Astronomy and Space Sciences
2015 .09
-
A Coaxial and Off-axial Integrated Three-mirror Optical System with High Resolution and Large Field of View
Current Optics and Photonics
2016 .02
-
Ti2O3 -TiO2 thin films as for heat mirror
한국진공학회 학술발표회초록집
2020 .02
-
Impeded frictional aging by the presence of experimental fault mirror
대한지질학회 학술대회
2016 .10
-
An easily accessible method for DNA immobilization on silicon surfaces
한국진공학회 학술발표회초록집
2017 .08
-
Reactions between silicon precursors and surface sites during atomic layer deposition of silicon nitride
한국진공학회 학술발표회초록집
2016 .08
-
ITER 레이저 진단계 및 First mirror 관련 기술추적 및 감마선오염 미러 특성 연구
한국진공학회 학술발표회초록집
2017 .02
-
Integrated Modeling for the Design of Deformable Mirrors Using a Parametric Module Method
Current Optics and Photonics
2015 .10
-
Development of a thin-film deposition system for X-ray mirror coating
한국진공학회 학술발표회초록집
2021 .02
-
Wide Field-of-View Imaging Using a Combined Hyperbolic Mirror
Current Optics and Photonics
2017 .08
-
Silicon oxide 두께에 따른 온도센서의 특성분석
한국진공학회 학술발표회초록집
2018 .08
-
Comparison of mirror functors of elliptic curves via LG/CY correspondence
대한수학회지
2020 .01
-
Influence of additive and current condition in Through Silicon Via(TSV) filling
한국진공학회 학술발표회초록집
2017 .02
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2023-425-000240309