메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
설한이 (경북대학교) 손상호 (한국기계연구원) 이공훈 (한국기계연구원) 김정철 (한국기계연구원)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제35권 제1호
발행연도
2023.1
수록면
1 - 10 (10page)
DOI
10.6110/KJACR.2023.35.1.001

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
PCHE, Printed Circuit Heat Exchanger, is widely used for industrial applications with increasing demand in extreme environments. As interest in hydrogen for future fuel is increased, the interest in PCHE is also increased. In this study, we focused on the flow distribution in channels of PCHE. Although flow distribution has been employed a lot of times for decades, there are few reliable studies based on experimental results that can be directly applied in actual industrial fields. Here, we introduce experimental results about flow distribution by flow visualization. Effects of flow rates and the verticality are addressed to clarify the difference in distribution. When the flow rate is low, the flow speed difference between channels is not significantly large. If it becomes larger, the difference becomes large. Moreover, when inlet and outlet pipes are installed at a slight angle, back flow is observed. The speed profile of the tilted case in high flow rate is not easily predicted. Although the tilting angle looks very small, the measured speed profile can be completely different.

목차

Abstract
1. 서론
2. 실험방법 및 데이터 처리
3. 실험결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0