메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
문준오 (창원대학교) 김경환 (창원대학교) 박이현 (한국핵융합에너지연구원) 이창훈 (한국재료연구원)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第40卷 第6號
발행연도
2022.12
수록면
496 - 501 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (23)

초록· 키워드

오류제보하기
Five reduced-activation ferritic/martensitic (RAFM) steels containing different contents of Cr, Ta, and Ti were prepared and the weldability of these alloys were evaluated by autogeneous gas tungsten arc (GTA) welding. After welding, post weld heat treatment (PWHT) was performed at temperatures of approximately 730-750 ℃. The microstructures of all alloys after PWHT consisted of a tempered martensite matrix and two types of precipitates, namely, M<SUB>23</SUB>C<SUB>6</SUB> and MX. Both the tensile and yield strength of the GTA welds increased with an increase in Cr and Ta contents due to the enhanced solid solution and precipitation strengthening. An increase in Ti content promoted the precipitation of fine MX particles and thereby suppressed the precipitation of M<SUB>23</SUB>C<SUB>6</SUB> carbide. This improved the impact toughness without a considerable loss of strength.

목차

Abstract
1. 서론
2. 실험 방법
3. 실험 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2023-581-000334087