지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.3
- 수록면
- 917 - 925 (9page)
이용수
초록· 키워드
오류제보하기
Steam generator (SG) tubes in a nuclear power plant can undergo rapid changes in pressure and temperatureduring an accident; thus, an accurate model to predict short-term creep damage is essential.
The theta (q) projection method has been widely used for modeling creep-strain behavior under constantstress. However, many creep test data are obtained under constant load, so creep rupture behavior undera constant load cannot be accurately simulated due to the different stress conditions. This paper proposesa novel methodology to obtain the creep curve under constant stress using a modified q projectionmethod that considers the increase in true stress during creep deformation in a constant-load creep test.
The methodology is validated using finite element analysis, and the limitations of the methodology arealso discussed. The paper also proposes a creep-strain model for alloy 690 as an SG material and a novelcreep hardening rule we call the damage-fraction hardening rule. The creep hardening rule is applied toevaluate the creep rupture behavior of SG tubes. The results of this study show its great potential toevaluate the rupture behavior of an SG tube governed by creep deformation.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Creep strain modeling for alloy 690 SG tube material based on modifi ed theta projection method
Nuclear Engineering and Technology
2022 .05
-
Thermal Aging Effects on Creep Rupture Behavior of Alloy 617
대한기계학회 춘추학술대회
2017 .11
-
Investigating creep behavior of Ni–Cr–W alloy pressurized tube at 950 °C by using in-situ creep testing system
Nuclear Engineering and Technology
2020 .01
-
An improved Maxwell creep model for salt rock
Geomechanics & engineering
2015 .01
-
대형 가스터빈 1단 베인 크리프 수명평가를 위한 탄성추종 계수 기반 크리프 응력 예측
대한기계학회 춘추학술대회
2017 .04
-
실험을 통한 플라스틱 크리프 거동 특성 연구
한국정밀공학회 학술발표대회 논문집
2015 .05
-
Creep 기반 화력발전 소재의 고온 수명 예측 기술 개발
한국기계가공학회 춘추계학술대회 논문집
2021 .12
-
Study on Creep Fracture Behavior of Modified SUS304H Steel at 700℃ by Using Small Punch Creep Testing
한국에너지학회 학술발표회
2016 .10
-
수정 θ 투영법 기반 증기발생기 전열관 크리프 모델 개발
대한기계학회 춘추학술대회
2021 .06
-
Alloy 690 증기발생기 전열관 재료의 크리프 거동 평가
한국압력기기공학회 논문집
2019 .12
-
Circumferential steady-state creep test and analysis of Zircaloy-4 fuel cladding
Nuclear Engineering and Technology
2021 .07
-
The Effects of the Creep Damage to Microstructural Change and Characteristics of Creep Test for Reformer Tube USING HP-40Nb Modified Materials
한국에너지학회 학술발표회
2015 .04
-
Thermal creep behavior of CZ cladding under biaxial stress state
Nuclear Engineering and Technology
2020 .12
-
Comparison of Direct and Indirect Measurement of Creep Uncertainty in the Calibration of Force Measuring Devices
Journal of the Korean Society for Precision Engineering
2018 .07
-
땅밀림지 규모와 지질특성 기반의 땅밀림지 영향인자 분석
농업생명과학연구
2021 .10
-
Thermal aging of Gr. 91 steel in supercritical thermal plant and its effect on structural integrity at elevated temperature
Nuclear Engineering and Technology
2024 .01
-
Alloy 690 전열관의 크리프 변형 및 파단 거동
한국압력기기공학회 논문집
2020 .06
-
Effect of Temperature and Stress on Creep Behavior of Ultrafine Grained Nanocrystalline Ni-3 at% Zr Alloy
Metals and Materials International
2017 .01
-
초고온가스로용 Alloy 617 의 고온 크리프 파단 거동Very High Temperature Reactor
대한기계학회 춘추학술대회
2016 .04
-
Biaxial creep property of ethylene tetrafluoroethylene (ETFE) foil
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0