메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Gitae Park (POSCO) Kwangjoong Kim (Hanyang University) Youngchai Lee (Hanyang University) Sangho Uhm (POSCO) Changhee Lee (Hanyang University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.28 No.5
발행연도
2022.5
수록면
1,157 - 1,168 (12page)
DOI
10.1007/s12540-021-00985-w

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The kinetics of low-temperature tempering in a dissimilar resistance spot weldment between medium Mn transformationinducedplasticity (MT) steel and dual-phase (DP) steel were investigated to interpret the change of failure mode after apaint-baking process. After the isothermal heat treatments with various soaking conditions, the Johnson?Mehl?Avrami (JMA)model describing nucleation and growth kinetics was adopted. The results indicated that the tempering kinetics parameterswere different for each area of the welds. Especially in the coarse-grained heat-affected zone (CGHAZ) in the MT steel,carbon diffusion from martensite to austenite acts as a tempering mechanism at an earlier stage of tempering. Thereafter,the tempering mechanism changes to epsilon carbide precipitation and coarsening. In comparison, the change was relativelyslow or absent in the DP steel CGHAZ and fusion zone because of its lower kinetics parameters. Based on the results ofthis study, ways to improve the cross-tension strength of entire welds in automotive applications of MT steel are discussed.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0