메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Sang‑Man Yun (Pohang University of Science and Technology) Hojun Gwon (Pohang University of Science and Technology) Jinkeun Oh (POSCO) Sung‑Joon Kim (Pohang University of Science and Technology)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.28 No.11
발행연도
2022.11
수록면
2,668 - 2,676 (9page)
DOI
10.1007/s12540-021-01161-w

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The effect of diffusion heat treatment (DHT) on the cracking of the coating layer in Al-Si coated hot press forming (HPF)steel was investigated. Cracking-induced micro-delamination in the coating layer has limited applications of the Al-Si coatedHPF steels. Introduction of DHT process can modify the microstructure and constituent phase in the coating layer whichcan reduce the cracking. DHT was performed at 650 °C for 360 min to drive Fe diffusion into the coating layer. Formationof band-shaped τ1-Fe3Al2Si3 in the coating layer during the DHT was observed by EBSD and SEM. After HPF process ofthe diffusion heat treated coating specimen, the phase fraction of FeAl increased and that of η-Fe2Al5 decreased comparedto the conventional Al-Si coating specimen, due to the increase of τ1-Fe3Al2Si3. Owing to the higher fracture toughness ofFeAl compared to η-Fe2Al5, application of DHT improved the toughness of the coating layer and reduced the crack densityin it. DHT did not significantly affect the mechanical properties of the base steel.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0