지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.12
- 수록면
- 2,874 - 2,883 (10page)
- DOI
- 10.1007/s12540-022-01180-1
이용수
초록· 키워드
오류제보하기
The present work focuses on the mechanical behavior of single austenite grain with different orientations in a twinninginduced plasticity (TWIP) steel by nanoindentation test. Deformation twins can be found in [0 0 1]-orientated grains afternanoindentation, while they are absent in grains with [1 1 1] orientation. This inconformity can be ascribed to a largerSchmid factor for leading partial dislocations compared to trailing partial dislocations on the primary slip system in [0 01]-orientated grains during compression. Different from deformation twins, high-density dislocations can be found in both[0 0 1] and [1 1 1]-orientated grains after nanoindentation. The present work suggests that the density of deformation twinscan be enhanced by controlling crystal orientation through texture engineering or by deformation along different directionssuch as cross-rolling.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Grain size effect on tensile and wire drawing behaviors in twinning-induced plasticity steel
대한기계학회 춘추학술대회
2021 .11
-
Microstructural Evolution and Mechanical Behavior of Additively Manufactured 316 L Subjected to Varied Deformation Directions
Metals and Materials International
2024 .01
-
Effects of Grain Boundary on {100} Recrystallization Texture of High Silicon Electrical Steel
Metals and Materials International
2018 .01
-
Strengthening Effect of Decreased Dislocation Density After Annealing in Pure Aluminum or Copper
Metals and Materials International
2024 .03
-
First-Principles Studies on Twinnability of Magnesium Alloys: Effects of Yttrium and Lithium on ( 101̄1)[1̄012] Compression Twinning Deformation Processes
Metals and Materials International
2018 .01
-
Role of W on the Dislocation Evolution in Ni-W Alloy During Tension Followed by Compression Loading
Metals and Materials International
2016 .01
-
Gradient Nanotwinned Structure and Its Formation Mechanism in Inconel 625 Alloy Produced by Surface Mechanical Grinding Treatment
Metals and Materials International
2023 .05
-
Texture Analyses and Mechanical Behavior of a High-Mn Steel Subjected to Different Pass Number of Simple Shear
Metals and Materials International
2024 .08
-
Large Deformation Behavior of Twin-Induced Plasticity Steels Under High-Pressure Torsion
Metals and Materials International
2016 .01
-
Effects of Tensile Twinning on the Stretch Formability of Mg
Metals and Materials International
2017 .01
-
Preparation and Characterization of Mg Alloy Rods with Gradient Microstructure by Torsion Deformation
Metals and Materials International
2016 .01
-
Bimodal-Structured Al?Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature
Metals and Materials International
2021 .12
-
오스테나이트계 고망간강의 인장 특성에 미치는 결정립 크기의 영향
한국재료학회지
2016 .01
-
Nucleation Mechanism of Discontinuous Dynamic Recrystallization with Restrained Grain Boundary Sliding
Metals and Materials International
2021 .12
-
Grain Morphology and Orientation Effect on the High‑Temperature Tensile Behavior of Directionally Solidified Magnesium Alloy
Metals and Materials International
2020 .01
-
AZ31 합금의 톱니형 (serrated) 입계에서 주기적인 쌍정 및 전위의 형성
한국소성가공학회 학술대회 논문집
2019 .10
-
Characterization of Twin-Like Structure in a Ferrite-Based Lightweight Steel
Metals and Materials International
2016 .01
-
알루미늄 멀티결정재 변형거동 예측을 위한 전위밀도 기반 변형률 구배 결정소성 모델
대한기계학회 춘추학술대회
2015 .11
-
Hot Tensile Deformation Behavior of Twin Roll Casted 7075 Aluminum Alloy
Metals and Materials International
2015 .01
-
Preparation and Effect Analysis of {10?12} Extension Twins at the Edge of AZ31 Magnesium Alloy Plate
Metals and Materials International
2021 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0