메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Juju Baia (Huaqiao University) Shengcai Li (Huaqiao University)
저널정보
국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.79 No.5
발행연도
2021.9
수록면
579 - 591 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Six specimens of prefabricated high-strength concrete columns with confining overlapping stirrups were tested under cyclic lateral loads, and a finite element analysis was performed using ABAQUS to investigate the seismic behavior of the columns. The influences of the axial compression ratio, stirrup diameter and stirrup spacing were considered. Comparative analyses indicate that the numerical simulation outcomes agree well with the experimental results, including the hysteretic curves, peak loads and failure modes. With an increase in the axial compression ratio, the ultimate load bearing capacity of the specimen increases, ductility worsens, strength descending part of the shear-displacement skeleton curves steepens, and energy dissipation capacity increases slightly. When the stirrup spacing decreases or the stirrup diameter increases, the ultimate load bearing capacity, ductility and energy dissipation capacity of the specimens increase. The effect of the axial compression ratio on the shear capacity of the test specimens is much more pronounced than that of the stirrup ratio. With an increase in the stirrup diameter, the initial stiffness of the specimen decreases, and stiffness deterioration during the late stages of loading cycles slows down. However, changing the spacing of the stirrups has little effect on the stiffness of the specimens.

목차

등록된 정보가 없습니다.

참고문헌 (29)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0