지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.40 No.6
- 발행연도
- 2021.9
- 수록면
- 781 - 794 (14page)
이용수
초록· 키워드
오류제보하기
To solve the shortcomings of single-limb or double-limb cold-formed thin-walled steel column easy to buckling failure and low bearing capacity, a new cross-shaped built-up cold-formed thin-walled steel multi-limb-section is proposed for columns. The structure is composed of several single-limb cold-formed thin-walled steel C-channel sections. The flanges and webs are connected by self-drilling screws. In order to assess the mechanical properties of this built-up multi-limb-section column and the influence of the slenderness ratio on the column behavior, the axial loading tests were carried out. Three kinds of single-limb column and built-up multi-limb-section column with different ratio of slenderness were tested. The deformation process, failure mode and bearing capacity were analyzed. The SC specimens failed with local buckling and distorted buckling, while the MC and LC specimens failed with local buckling and global instability. For the built-up multi-limb-section column, the section combination multiple is 12. Compared to the section combination multiple, the bearing capacity combination multiple is much higher. The SQ specimens’ combination factor is about 1.1, the combination factor of MQ specimens and LQ specimens are about 1.4 and 3.0, respectively. It is concluded that the overall combined-performance and structural efficiency of the specimens is proportional to the combination factor.
목차
등록된 정보가 없습니다.
참고문헌 (37)
참고문헌 신청
M. Abbasi / 2018 / Elastic buckling analysis of cold-formed steel built-up sections with discrete fasteners using the compound strip method / Thin-Walled Structures 124(3):58~71
2016 / AISI S100-2016 American Iron and Steel Institute. North American Specifications for the Design of Cold-Formed Steel Structural Members / American Iron and Steel Institute
G. Beulah Gnana Ananthi / 2021 / Influence of intermediate stiffeners on the axial capacity of cold-formed steel back-to-back built-up unequal angle sections / Structures 32(8):827~848
G. Beulah Gnana Ananthi / 2021 / Non-linear behaviour and design of web stiffened battened built-up stainless steel channel sections under axial compression / Structures 30(4):477~494
2005 / AS/NZS 4600 Cold-formed steel structures / Australian and New Zealand standards
2016 / AISI S100-2016 American Iron and Steel Institute. North American Specifications for the Design of Cold-Formed Steel Structural Members / American Iron and Steel Institute
G. Beulah Gnana Ananthi / 2021 / Influence of intermediate stiffeners on the axial capacity of cold-formed steel back-to-back built-up unequal angle sections / Structures 32(8):827~848
G. Beulah Gnana Ananthi / 2021 / Non-linear behaviour and design of web stiffened battened built-up stainless steel channel sections under axial compression / Structures 30(4):477~494
2005 / AS/NZS 4600 Cold-formed steel structures / Australian and New Zealand standards
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Study on axial compressive behavior of quadruple C-channel built-up cold-formed steel columns
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Nonlinear behavior of axially loaded back-to-back built-up cold-formed steel un-lipped channel sections
Steel and Composite Structures, An International Journal
2018 .01
-
Experimental study on cold-formed lipped channel stub columns reinforced by steel bars or steel strips
Steel and Composite Structures, An International Journal
2021 .01
-
중심압축력을 받는 냉간성형 탄소강 각형강관 압축재의 좌굴거동에 관한 실험적 연구
대한건축학회논문집
2022 .10
-
Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines
Steel and Composite Structures, An International Journal
2020 .01
-
Hysteretic behaviors and calculation model of steel reinforced recycled concrete filled circular steel tube columns
Structural Engineering and Mechanics, An Int＇l Journal
2022 .08
-
Behavior of stiffened and unstiffened CFT under concentric loading, An experimental study
Steel and Composite Structures, An International Journal
2019 .01
-
Compressive behavior of built-up open–section columns consisting of four cold-formed steel channels
Steel and Composite Structures, An International Journal
2022 .12
-
Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines
Steel and Composite Structures, An International Journal
2020 .01
-
Finite element analysis and axial bearing capacity of steel reinforced recycled concrete filled square steel tube columns
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Experimental and numerical study of an innovative 4-channels cold-formed steel built-up column under axial compression
Steel and Composite Structures, An International Journal
2022 .02
-
Experimental and numerical studies on the behaviour of corroded cold-formed steel columns
Steel and Composite Structures, An International Journal
2020 .01
-
Axial capacity of back-to-back built-up cold-formed stainless steel unlipped channels-Numerical investigation and parametric study
Steel and Composite Structures, An International Journal
2021 .09
-
수직하중에 대한 한옥 기둥부재의 초기설계를 위한 구조검토방안
대한건축학회 논문집 - 구조계
2015 .11
-
Experimental and numerical investigation of strengthened deficient steel SHS columns under axial compressive loads
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Experimental and numerical investigation of strengthened deficient steel SHS columns under axial compressive loads
Structural engineering and mechanics : An international journal
2018 .01
-
An alternative evaluation of the LTB behavior of mono-symmetric beam-columns
Steel and Composite Structures, An International Journal
2019 .01
-
Axially-compressed behavior of CFRP strengthening steel short columns having defects
Structural Engineering and Mechanics, An Int＇l Journal
2024 .07
-
Studies on T-Shaped composite columns consist of multi separate concrete-filled square tubular steel sections under eccentric axial load
Steel and Composite Structures, An International Journal
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0