지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.8
- 수록면
- 369 - 378 (10page)
- DOI
- 10.7232/JKIIE.2023.49.4.369
이용수
초록· 키워드
오류제보하기
This study presents the usefulness of response surface methodology (RSM) in die-sinking electrical discharge machining (EDM) process improvement. Conventional research on this process has been focused on the single-electrode method, but the industry practitioners prefer adopting the two-electrode method, one for the roughing and the other for the finishing stages, using a single discharge step. We propose a multiple discharge step (MDS) method that uses three discharge currents at each stage. RSM is employed to optimize the discharge conditions. Experimentally, the MDS method combined with RSM improves electrode edge wear and surface roughness.
목차
1. Introduction
2. Three EDM Approaches
3. Comparative Experiments
4. Response Surface Methodology for MDS
5. Summary
References
참고문헌 (9)
참고문헌 신청
Bédard, F., Jahazi, M., and Songmene, V. (2020), Die-Sinking EDM of Al6061-T6: Interactions between Process Variables, Process Performance, and Surface Characteristics, International Journal of Advanced Manufacturing Technology, 107(1), 333-342.
Derringer, G. and Suich, R. (1980), Simultaneous Optimization of Several Response Variables, Journal of Quality Technology, 12(4), 214-219.
Flaño, O., Ayesta, I., Izquierdo, B., Sánchez, J. A., and Ramos, J. M. (2018), Experimental Study on the Influence of Electrode Geometry and Electrode Path on Wear Pattern in EDM, Procedia CIRP, 68, 405-410.
Jeong, H. J., Byun, J. H., Cheng, D. J., Oh, Y. J., and Kim, S. J. (2017), The Comparison of Response Surface and Discharge Energy Methods in Predicting MRR and Roughness of Sink EDM, Journal of the Korean Society of Manufacturing Technology Engineers, 26
Kiyak, M. and Cakır, O. (2007), Examination of Machining Parameters on Surface Roughness in EDM of Tool Steel, Journal of Materials Processing Technology, 191(1), 141-144.
Derringer, G. and Suich, R. (1980), Simultaneous Optimization of Several Response Variables, Journal of Quality Technology, 12(4), 214-219.
Flaño, O., Ayesta, I., Izquierdo, B., Sánchez, J. A., and Ramos, J. M. (2018), Experimental Study on the Influence of Electrode Geometry and Electrode Path on Wear Pattern in EDM, Procedia CIRP, 68, 405-410.
Jeong, H. J., Byun, J. H., Cheng, D. J., Oh, Y. J., and Kim, S. J. (2017), The Comparison of Response Surface and Discharge Energy Methods in Predicting MRR and Roughness of Sink EDM, Journal of the Korean Society of Manufacturing Technology Engineers, 26
Kiyak, M. and Cakır, O. (2007), Examination of Machining Parameters on Surface Roughness in EDM of Tool Steel, Journal of Materials Processing Technology, 191(1), 141-144.
이 논문의 저자 정보
이 논문과 함께 이용한 논문
Capacity Scalability Planning Algorithms for Job-shop-type Reconfigurable Manufacturing Systems with Dynamic Demands
Xuebin Li
,
Hyeon-Il Kim
,
Dong-Ho Lee
대한산업공학회지
2024
.06
안드로이드 앱과 구글 Firebase를 활용한 IoT 스마트팜 제어
이태상
,
김동환
,
손명원
외 2명
한국정보과학회 학술발표논문집
2023
.06
제조품질 향상을 위한 데이터 전처리 프로세스
서호진
,
김도현
,
변재현
대한산업공학회지
2023
.06
다이나믹 토픽모델링 분석 기법을 통한 도심항공교통(UAM) 관련 연구 동향 분석
백슬아
,
송지훈
,
전정환
한국혁신학회지
2023
.02
드론 운용 실험을 위한 3D 시뮬레이터의 특성 비교
김강산
,
조희태
,
김태환
외 2명
한국정보과학회 학술발표논문집
2021
.06
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0102-2023-530-001919312